Quality replacement green spot tumble dryer thermostat kit to fit Proline, Elto, Brandt, General Electric, Indesit, Ariston, Electra, Upo, Jackson, Fagor, Bomann, White Westinghouse, Singer, Asko, Crusader, Creda, Hotpoint, Clatronic & Edesa models of tumble dryer.
Equivalent to product code - C00095566
The kit includes 106 degrees (cycling stat) and 130 degrees (one shot stat)
Both thermostats in the kit should be replaced
Please check you model number against the fits models list below before ordering
Indesit have changed this part number from 1701583 to C00095566
Please Note That This Part Is Date Code Dependent If In Doubt Contact Us for Confirmation
Hotpoint tumble dryer thermostat kit with green spot for models after May 1999
To prevent failure of your tumble dryer thermostats please use the following guidelines:
The inner disc of the thermostat must not be touched when fitting. Do not terminate the dryer cycle early. Your dryer needs the last 10 minutes of the cycle in order to clear residue heat in the dryer airflow. Restricted airflow will cause the thermostats to fail. Make sure you do not overload your dryer and regularly clean your lint filters after every load and empty the condenser (if you have one) as recommended by the manufacturer. If your front duct thermostat isn’t working it will cause unnecessary stress on this part causing failure.