weird whining noise at back from white unit where two tubes exit and go into water collection tray which seems to be always empty now.

Hi, I have a problem with the dryer not starting. The door switch is ok and I’ve changed the pcb thinking it was that but still not starting. I came across your very helpful video regarding the capacitor but on my dryer there is no noise at all from the motor but wondered if it could still be a faulty capacitor?
Any help would be greatly appreciated.
Thanks, Neil

The clear plastic pipe that slots in at the back doesnt seem long enough and its only push fit! Can i buy a longer one and glue it in for a better fit

Hi Paul,

Thank you so much for the video in this model, it was a great help when I opened it up to see what was wrong. I’ll definitely be buying you a beer when this is all over! Now that it’s open, I see I need to replace the belt but I’m also a bit worried that the drum feels stiff to turn by hand. I checked each of the jockey wheels and they spin freely so I wonder whether the felt seals are worn or clogged. In any case to replace the belt I think I need to get the drum loose so will inspect them. For this model, should I get to the drum from the front or the back of the machine?

My tumble dryer was making a lot of noise for a few weeks it is a Hotpoint TVM572
would you know which belt fits my tumble dryer and what I should do to service it and eliminate the noise

I have a hoover tumble dryer dxc10tceb-80 and it leaking water from the door, also I get an error code e21 on occasions

My tumble dryer Machine is not heating, i do not know where to start looking, can you help?

The Clean out airways light comes on even though I have cleaned a fluff from all filters and cleaned out the condenser unit – there is no restriction in the airflow coming into the unit either – I have contacted Miele and they are unable to assist – also, the washing going into the unit is not too wet.
Have changed the sensitivity of the sensor to “heavy build up” and it still stopped.
I then deactivated the light and it still stopped with the light coming on.
I assume there is a faulty part in the circuit.
Regards,
Gary

The machine works and tumbles but is not drying the clothes. What can I check?

The tumble dryer is not spinning, I have already changed the capacitor and it is still not working. What else can I try?