Beko DRCS68W tumble dryer not heating

by / Monday, 01 February 2016 / Published in

What else could cause the heater not to work on as Beko DRCS 68W condenser tumble dryer? The heater block checks out ok, the stats are ok the front NTC stat seems to work with heat on it giving a reading, what else could the problem be?? I have got a new element to put in anyway but Im not sure this is the problem, what other things can I look for?? also the NTC sensor and it checks out ok, I,ve put a new one in anyway and the heater still wont come on!!!!! so now on this BEKO, its had condenser cleaned, lint filter checked, new heater block complete with thermostats incorporated, new front ntc sensor and still the heater wont come on!!!!!!! What else can cause thi heater NOT to work, Ive looked at every tutorial but cant seem to locate ANY other causes of heater problems other than element and/or stats!!!! Is there any internal heater trip or fuse any where in this machine???  Its a BEKO DRCS68W, I cant find any internal wiring diagram anywhere on the beko site or the search engines any where, Now getting to desperation stage for this machine!!! any additional help will result in a few beers!!!!!!

Joseph

 

 

Paul answers

Paul answers

 

BEKO DRCS68W tumble dryer Spare Parts

 

Hi Joseph

 Double check the heating element, and also check again the front stat if the pcb is not getting the right reading it will not heat up. when you have checked that the wiring is good and ntc and heater then it might be a fault with the pcb

 

3 Responses to “Beko DRCS68W tumble dryer not heating”

  1. john says : Reply

    Beko DRCS68W tumble dryer not heating. I have the same problem would be very interested to hear from you if had any luck. also wiring diagram not found, pain the bottom

    yours j. taylor

  2. Tudor West says : Reply

    Just replaced belt which had broken and front felt on inside front by drum but now heater is not working(was before belt snapped drum stuck?)cannot find breakdown(diagram)of tumble condenser sensor dryer 6kg drc68w to see where heater is positioned.
    Help
    Please

  3. Ashley thompson says : Reply

    Hi my name is Ashley I have a beco condenser sensor dryer dcu8230 8kg I have a problem with the dryer not geting hot I have replaced the heating element and the pcb board wat els could be the problem

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP