Siemens SN45M200SK/14 dishwasher show E24 but the drain pump seems operate normal
Hello my dishwasher shows error code E24 but the drain pump seems operate normal. There is no water in the bottom of the filterhole. What can be the reason for my error code. Siemens SN45M200SK/14
Morten
Hi Morten!
If your Siemens dishwasher is showing the E24 or E25 fault then this is a pump problem.
You will need to take the pump out to make sure there is no glass or bits of food ETC blocking the pump but if you need to replace the pump i have put a link here for you for the correct pump for model Siemens SN45M200SK/14.
To assist you with this with repair on your Siemens dishwasher i have put videos below
I too have E24 error appearing at the end of the cycle with water at the bottom. The drain pump seems to work fine as I have opened the dishwasher mid cycle after hearing water being drained and have found no water within the machine. I have check the impeller and it rotates freely with my finger. What I have noticed is that towards the end of the cycle, the machine continues to display 001 min for many minutes and then E24 error appears. Any help will be appreciated.