How to replace washing machine motor on Hoover, Candy, Iberna, Teka, Otsein & Zerowatt.

by / Wednesday, 06 November 2013 / Published in Motors, Repair Guides, Washing machines




How to replace washing machine motor on Hoover, Candy, Iberna, Teka, Otsein & Zerowatt.

This video will show you how to replace washing machine motor, we are working on a Hoover but this guide is good for Candy, Iberna, Teka, Otsein & Zerowatt, and some other makes of the Candy group.
To order your washing machine motor you will need your full model number (This is normally around the washing machine door frame on a sticker) and also your motor Type, written on the motor Label.

replacing washing machine motor




 

This video will show you how to replace washing machine motor, we are working on a Hoover but this guide is good for Candy, Iberna, Teka, Otsein & Zerowatt, and some other makes of the Candy group.

To replace a motor on a washing machine might sound scary, but it’s a surprisingly easy to replace.

1 Remove the lid and the back panel.

2 Then you need to remove the washing machine belt that is attached to the motor and drum pulley.

3 You will now need to remove the bolts that attach the motor to the washing machine drum.

4 Using a flat blade screwdriver release the motor of the drum brackets or lugs.

One Response to “How to replace washing machine motor on Hoover, Candy, Iberna, Teka, Otsein & Zerowatt.”

  1. Farhan says : Reply

    Would greatly appreciate your help on how to connect the motor wiring of Hoover HWM1800 or 180. The motor does not had a socket unlike other motors but independent wiring with clips. The point market on the wiring are P, 1, 2, 3 and 4. Not sure which colour wire goes on which point.

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP