This Drum Spider spare part of all repairs on washing machine can be one of the most difficult to be successfully completed, as this requires a complete strip down of the machine. Find out more about drum spiders below:
What does the washing machine drum spider do?
The inner drum of the washing machine is a stainless steel part in which you put the clothes. On the back of that there is a spider and a shaft, That shaft slides into the bearings there is normally a seal that can fail over time and let´s water get into to the bearings causing them to corrode.
Reasons the drum spider fails.
There are a number of factors that can cause the drum spider to break. Either by over loading the washing machine tub or due to corrosion on the aluminum part of the spider.
The following faults typically indicate a problem with the drum spider, If you are experiencing a loud rumbling or roaring sound in the spin cycle, even when the machine is empty;
*Remember that broken drum spiders may not be the only fault that can cause these issues to arise. You need to check the drum bearings for damage as well.
How to replace a washing machine drum spider.
The first thing you have to realize about a drum spider change on any washing machine is that, if you’re not confident in your ability to totally strip the machine and re-build it safely then call in a friend who has knowledge of mechanical things like cars or you will have to call in a professional repair engineer . This is a job that will take up most of your day. Sometimes instructions vary depending on the make and model:
Sorry we do not have the exact repair guide for this drum spider at this moment.
Use spaces to separate tags. Use single quotes (') for phrases.
Please enter your email address below. You will receive a link to reset your password.Ahh, wait, I remember now!