We have a single parent mother and are trying to assist. She has the Siemens WM14P360GB washing machine that stopped functioning with an E43 fault which is listed as brushes.
I have replace the brushes though there was still some wear left on the old ones.
The motor will still not run in any wash selection.
It drains, fills, door opens and the timer at the end of a program still shows 1 min without a door opening and does not clear.
I do not have a test rig for the motor and have not been able to configure the wiring as yet and have found connection 3 to be for both brushes not individual brushes l and right,.
Can you advise
Thanks,
Robin

Hi paul hope you are ok. Could you please tell me how to enter service mode for bosch wax28m60gr washing machine?
Thank you

Bosch WAS28461GB/07 washing machine gave error during wash cycle, door locked, switching off then selecting any option, drain, spin, etc, immediately gives E:57 error again. Tried resetting to no avail. Google searching suggests possible PCB Inverter circuit fault. Is it worth trying to repair? I recently fitted a new drum/door seal which will be wasted if machine written off.
Thanks for any help offered.

Hi Paul – love your u-tube videos, but struggling to access your on-line shop – contacting you here in the off-chance that you are able to supply a replacement door lock for my Seimens WM14S392GB/08 washing machine – either that or please point me in the right direction to source one. Many thanks and kind regards, Phil

Hi Paul, hope you are ok. My BOSCH WAS32791ME/23 washing machine’s drum is rubbing in 1 location. I suspect there is a broken spider or something else. I need your expert view and maybe some spare parts. Looking forward to hearing from you.