Hi paul, great video on bearing change. I have Bosch WAN28080GB/26 washing machine and also I’ve found the drum seal and bearing seal.
How do I buy the bearings please?
Thanks Barry

Bosch WAS28461GB/07 washing machine gave error during wash cycle, door locked, switching off then selecting any option, drain, spin, etc, immediately gives E:57 error again. Tried resetting to no avail. Google searching suggests possible PCB Inverter circuit fault. Is it worth trying to repair? I recently fitted a new drum/door seal which will be wasted if machine written off.
Thanks for any help offered.

Hi Paul – love your u-tube videos, but struggling to access your on-line shop – contacting you here in the off-chance that you are able to supply a replacement door lock for my Seimens WM14S392GB/08 washing machine – either that or please point me in the right direction to source one. Many thanks and kind regards, Phil

Hi, I have Bosch WAN24100GB/24 Washing Machine and whatever programme I try, it stops after 10 seconds.
There is no error code. I have to open the door manually and reset the machine, but the same thing happens.
I have replaced the door interlock and the pressure switch. Both PCBs look fine to the eye with no obvious fault. I’ve checked the motor (it does not have carbon brushes) and cleaned the pump. Still, the same problem – starts ….and then stops after 10 seconds. I have a video if that helps.
Thank you so much. Rohan

Hi Paul, hope you are ok. My BOSCH WAS32791ME/23 washing machine’s drum is rubbing in 1 location. I suspect there is a broken spider or something else. I need your expert view and maybe some spare parts. Looking forward to hearing from you.