We have a single parent mother and are trying to assist. She has the Siemens WM14P360GB washing machine that stopped functioning with an E43 fault which is listed as brushes.
I have replace the brushes though there was still some wear left on the old ones.
The motor will still not run in any wash selection.
It drains, fills, door opens and the timer at the end of a program still shows 1 min without a door opening and does not clear.
I do not have a test rig for the motor and have not been able to configure the wiring as yet and have found connection 3 to be for both brushes not individual brushes l and right,.
Can you advise
Thanks,
Robin

Hi l have Bosch WAQ243D1GB washing machine an need a replacement spider for the drum, or depending on price a replacement unit.
Thanks

Greetings Paul
Very helpful videos on your YouTube channel !
Could you tell me where i can find the codes for :
Bosch 500 series WAT28401UC/12 washing machine
The only code I know is the child lock.
I am looking for the codes to reset the electronics / sensors. ( aside from turning off the breaker which doesn’t do anything really )
I’ve seen you doing a reset technique with another model …. but it doesn’t seem to work on my machine.
I have no error messages. But the machine keeps telling me the door isn’t closed (even if it is.)
Thank you so much for your time. Any information would be greatly appreciated

Hi paul hope you are ok. Could you please tell me how to enter service mode for bosch wax28m60gr washing machine?
Thank you

Bosch WAS28461GB/07 washing machine gave error during wash cycle, door locked, switching off then selecting any option, drain, spin, etc, immediately gives E:57 error again. Tried resetting to no avail. Google searching suggests possible PCB Inverter circuit fault. Is it worth trying to repair? I recently fitted a new drum/door seal which will be wasted if machine written off.
Thanks for any help offered.