I have Beko WI1573 washing machine. Removed drive belt and established that click was from motor. I will also need associated pcb for motor, but your website doesn’t recognise model number for pcb.

Last week my Beko WMB714422B washing machine was running and I heard a loud pop. I had a look at the machine and the motor’s brushes, one was broken and the other was fine, a longer length. So, I replaced the brushes and then realized that the PCB board that supplies power to the motor had two tracks blown on there. So, purchased a new one. Today i fitted the PCB and ran the machine… It blew the fuse again. I pulled out the motor to examine the brushes again. On my motor housing where the brushes sit there are two position options for the brush to sit. I placed the brushes so that the flat side of the brushes are touching the contacts and not where the tip touches the contacts on the motor. I would really appreciate any further assistance n how to get the washing machine running …. dirty clothes are pilling up and wifey is not happy, so any help most appreciated. Thank you

I’ve been using my Beko WMI61241 integrated washing machine for a few years without any issues, but recently I’ve encountered a problem. When I turn on the machine, the light on the display panel comes on, but the display itself doesn’t show anything. It’s just blank. The machine doesn’t seem to respond to any button presses either. I’ve tried unplugging it and plugging it back in, but it hasn’t made any difference.
Could you please advise on what might be causing this issue and how I can fix it? Is there a way to reset the machine or do I need to look into getting it repaired?
Thanks in advance for your help!

Beko WMB 81241 LW washing machine stopped mid cycle and display now not working. Machine full of water. Checked electrics, fuses etc. but they seem ok. Turned off and on at switch but on/off power button doesn’t turn on the display.

Please my washing machine needs a deep clean as it’s not draining