Hi I have a Beko WM5100W Washing Machine. It has power and lights but won’t start washing. The wash light did light, but the cycle didn’t start. And then when I didn’t the cancellation process (hold start for 3 seconds), the End light lit, but the cycle hasn’t ended. Can you please give me any ideas for how to diagnose what the fault is, so I can replace the relevant components?

Hi , seen your YouTube and was wondering would you have any info to help me fixing my washing machine it’s only 2,5years old
Beko wtk82011w
It won’t do a wash cycle it starts and stops about 5 seconds later the water only goes into the drawer on top for the conditioner
It will do a spin and drain cycle and a drum clean cycle and and rinse cycle
I have emptied the filter and cleaned it
Any help at all would be appreciated thank you so much

My Beko WTK92151W Washing Machine does the cycle, fills, washes, drains and then spins, like normal. After the final spin the screen just goes through it’s time adjustment. Normally it reaches 0 on the clock. The drain pump does a short final drain, the display then says end and the door lock clicks.
The screen just cycles round and the drum rotates slowly back and forth. I have to manually press the stop/start button to get it to end. It appears to be filling OK. The heater is working and I have checked the pump & drain pipe.

Hi paul I have a Beko WTB720E1W Washing Machine. The button works only if pressed in a certain way, the button is slightly wobbly but is in place.
Can you advice and supply a replacement part?