Hi I have a Beko WM5100W Washing Machine. It has power and lights but won’t start washing. The wash light did light, but the cycle didn’t start. And then when I didn’t the cancellation process (hold start for 3 seconds), the End light lit, but the cycle hasn’t ended. Can you please give me any ideas for how to diagnose what the fault is, so I can replace the relevant components?
- Parts
- FAQs
- Tutorials
Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page.
Having trouble with layered Navigation? Watch Video
Beko WTK82011W Washing Machine Won’t Start a Wash Cycle
Hi , seen your YouTube and was wondering would you have any info to help me fixing my washing machine it’s only 2,5years old
Beko wtk82011w
It won’t do a wash cycle it starts and stops about 5 seconds later the water only goes into the drawer on top for the conditioner
It will do a spin and drain cycle and a drum clean cycle and and rinse cycle
I have emptied the filter and cleaned it
Any help at all would be appreciated thank you so much
Beko WTK92151W Washing Machine Does Not Finish Cycles
My Beko WTK92151W Washing Machine does the cycle, fills, washes, drains and then spins, like normal. After the final spin the screen just goes through it’s time adjustment. Normally it reaches 0 on the clock. The drain pump does a short final drain, the display then says end and the door lock clicks.
The screen just cycles round and the drum rotates slowly back and forth. I have to manually press the stop/start button to get it to end. It appears to be filling OK. The heater is working and I have checked the pump & drain pipe.
Beko WTB720E1W Washing Machine Faulty Start/Pause Button
Beko WM5101W Washing Machine Won’t Complete Any Wash Program
Beko WM5101W washing machine will fill, turn drum in both directions, heat water then continue to turn one way for 10 seconds (approx), pause for ten seconds, then turn the other way for ten seconds for as long as I care to let it. Up to 20 minutes before I give up waiting for a drain and refill, and press and hold ‘Cancel’. The machine immediately stops, runs the pump to empty the suds and lights ‘Spin/End’. Can you advise, please, why the machine will not follow through any wash program, and what a solution may be?
With thanks.
( I found you on YouTube and am a subscriber)
(
Beko WMC1282W Washing Machine Error Codes & Diagnostic Test Mode (Full Guide)

In this guide, we’re focusing on the Beko WMC1282W washing machine. I’ll walk you through how to enter the machine’s diagnostic test mode and what all the error codes mean. This is the essential first step for correctly identifying any faults before you start a repair. The specific machine featured in our video had an […]
Dismantling Beko WMB71642 washing machine repair tips
BEKO WMB71642w washing machine motor ticking noise

Prepare yourself for an intriguing expedition into the inner workings of a Beko WMV71642W washing machine. Today, we embark on a journey to uncover the origins of a mysterious ticking noise emanating from within this appliance. Our mission is to demystify the intricate mechanisms of this modern marvel and, with the aid of detailed visuals,





