Hi Paul, I have a Grundig GTN38250HGCW Heat Pump Tumble Dryer.
Before I take any further action, I wanted to reach out to you about my problem before deciding whether to buy a new one or have it repaired. A couple of days ago, my tumble dryer stopped on program 6 and won’t change to any other program. The filters are clean, and I’ve also tried resetting it, but nothing seems to work. I searched for videos online but couldn’t find anything helpful. Hopefully, you can help me out. We’ve had this tumble dryer for the last 5 years, it’s been used a lot but well taken care of.
Looking forward to your response, hopefully with a positive solution.
Thank you,
Rafal

I have a Beko DPHX 80460W Heat Pump Tumble Dryer
Viewing your video, looks like it may be a faulty relay on the circuit board.
Circuit board P/N 2982590100.
Relays RL1 RL3 RL4 all same 10a 250vac 5RD-SH-10506-F-C
Relay RL2 10a 250Vac HF3FA 005HSTF(310)(925)
Heater plug socket KN9.
Can you identify the heater relay number?
Please could you quote a price for a new relay.
I can e-mail photos if you could give me an address to send them to if that’s helpful.
Thanks
Harry Cossar.

I have a Beko DPU8360 Heat Pump Tumble Dryer and taken the top, back and side off. There is no visible heater as in other models. Do I need to take the drum out and then disassemble the big white boxes below that? (Previously I replaced the capacitor but I can’t find any workshop manual nor useful youtube vid for this)

I have a Beko DHX83420W Heat Pump Tumble Dryer. Where the door latch connects in the machine this small piece of plastic has broken off. How do I fix this?

Hi love all your videos. I have a Beko DCU8230 Condenser Tumble Dryer. I couldnt find one that showed how to change the front felt support system. The dryer works fine, its clean but it is noisy. There is a lot of play at the front of the machine suggesting the felt and associated bearing pads need replacing. Can you help? Many thanks martin