I have a Beko WMB81241LW Washing Machine. Went to start cycle the normal way (closed door and heard it click shut, but play button is flashing. Changed cycle to a 40 and there’s now no temperature showing, changed back to 30 degrees and not showing. Play button still flashing. I’ve unplugged for 2 mins and […]

Good Afternoon, I’ve been watching your videos with keen interest. I have the Beko WMB71642W washing machine which isn’t always draining fully on first attempt. The drain pump had become noisy so have changed it for the second time now and am just wondering whether you have any advice, before my wife gets her way with buying a new machine? I was wondering whether it is the pressure switch or hose and just saw your disassembly video, so was just wondering whether a clog in the the drum where the pressure hose connects can be checked before replacing any more parts?
Thanks in advance,
Mark.

Hello, Paul. After aborting a rinse program midway my Beko WRE6411BWW washing machine started acting up. I tried all programms, but none will start. The door locks, then the machine gives a quiet “electrical humming” sound for ~5 seconds and then nothing. It stay like that indefinitely, the pump doesn’t start, the drum doesn’t turn. When I manually turn the drum there is a slight rattle, as heard in the video. I tried running diagnostics, got E29 which says is an electrical fault? When attempting the test cycle, nothing happens at all as you can see in the second video. What are my next steps? Check the carbon brushes and the motor control module? I can’t really find any diagrams or anything other than the user manual online. Thanks for the help in advance.
Video1: https://www.youtube.com/shorts/etNoIo8QryE
Video2: https://www.youtube.com/shorts/oP3hfHuPioc

After I press the start button, Beko WTK74011A washing machine starts to fill with water and after few minutes starts to empty it without any spin .
I’ve emptied from that small door , no leftover found . I don’t know what to do . Can you please help me with some advice? Thank you in advance .

Hi I have a Beko WM5100W Washing Machine. It has power and lights but won’t start washing. The wash light did light, but the cycle didn’t start. And then when I didn’t the cancellation process (hold start for 3 seconds), the End light lit, but the cycle hasn’t ended. Can you please give me any ideas for how to diagnose what the fault is, so I can replace the relevant components?