You can now ORDER wide range of new and second hand spare parts for your household.

  • Parts
  • FAQs
  • Tutorials

Refine your search


You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page.

Having trouble with layered Navigation? Watch Video

How do I find my model number?


Model Number Example Click Here
We're busy building a brand new shop! In the meantime, find what you need at our partner website.

Beko WTK82011W Washing Machine Won’t Start a Wash Cycle

Hi , seen your YouTube and was wondering would you have any info to help me fixing my washing machine it’s only 2,5years old
Beko wtk82011w
It won’t do a wash cycle it starts and stops about 5 seconds later the water only goes into the drawer on top for the conditioner
It will do a spin and drain cycle and a drum clean cycle and and rinse cycle
I have emptied the filter and cleaned it
Any help at all would be appreciated thank you so much

Beko WDB7426S1CW Washer Dryer Drying Function Not Working

We have a Beko WDB7426S1CW washer dryer. the washing machine works fine, it pumps, spins and cleans but the drying cycle does not work. The initial diagnosis brings up error code E08 but it appears to fill, and there does not appear to be an issue with the fill valves. Is the heater at the bottom of the drum, the heater for the washer And the dryer? Or is there another heater located somewhere else?

Beko WDIK754421 Washing Machine PSU Board Went Bang

Beko WDIK754421 washing machine’s board does not correspond to the circuit diagram for this machine, it is P/N2856540100.
Board needs replacing as TRIACs and surface mount resistors that drive the inlet valves destroyed. No short found on valve coils so want to find what caused flash/bang so a circuit diagram would be very helpful for the machine or board.

Beko WDR7543121W Washer Dryer Leaving Clothes Wet

Hello,
I have a Beko WDR7543121W Washer/Dryer, which seems to have developed an odd fault on the dryer.
Wash cycle is fine, with clothes merely damp once the spin cycle has completed
Drying cycle seems to be running fine – machine feels warm, can here it draining occasionally, but once the cycle has finished the clothes are dripping wet – much wetter than they were at the end of the spin cycle!
I called an engineer who stripped the machine down then checked the filters and the condenser, but couldn’t find a problem. He suggested it might be an intermittent problem with the drain pump. I tried a fresh load after he’d left (he wasn’t about to wait out a drying cycle), but had the same result. I tried extra dying time but no change, and in the end I re-ran the spin/drain cycle to get back to ‘just damp’ and had to dry the clothes on the house radiators.
Do you have any idea what the problem might be? I’m doubtful it’s the drain pump as the wash cycle always completes fine, and there’s no water in the drum after the drying cycle, only warm very wet clothes. I thought maybe the condenser but the engineer checked that, and I can see water going into the outside drain during the drying cycle.
I don’t really want to have to call Beko as they charge £145!, but the local engineer didn’t seem to have a clue.
Many thanks,
Dan

Beko WMC1282W Washing Machine: Error Codes, Diagnostic Test Mode & Dismantling Guide

Welcome back to How-to-Repair. Today we are looking closely at the Beko WMC1282W washing machine, a model produced roughly between 2015 and 2017. In this guide, I will walk you through how to access the machine’s diagnostic test mode and explain exactly what every error code means. This is the essential first step for correctly […]

Beko WMC1282W Washing Machine Error Codes & Diagnostic Test Mode (Full Guide)

In this guide, we’re focusing on the Beko WMC1282W washing machine. I’ll walk you through how to enter the machine’s diagnostic test mode and what all the error codes mean. This is the essential first step for correctly identifying any faults before you start a repair. The specific machine featured in our video had an […]

Hotpoint Aquarius Washing Machine Test Service Mode | Ariston, Indesit Washing Machine Diagnosing Faults & Error Codes

 Important notice on Beko Before entering test mode please be aware that you are not meant to leave the washing machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the drum is empty