Hi Paul hope you are well. I noticed that my Electrolux EWF9024CDWA washing machine is leaking water from the bottom but I can’t tell exactly where the leak is coming from. The leak usually starts during the washing or spinning cycle and it leaves a puddle on the floor. The hoses seem to be connected tightly and I’m not sure what else could cause this. Please help me mate. I am ready to donate you for some beer.

Hi, thank you very much for your videos and website it’s been a great help when fixing countless appliances for my family.
I am looking for 2 machines for myself. A washing machine and tumble dryer (condensing or heat pump) which have good reliability and arent too difficult to repair. Anti flood detection is a big plus.
If you have any recommendations for models of tumble dryer & washing machines you would recommend, i will keep an eye out for used ones.
This LG is under £100 and looks top of the line and not too old 2 years so thought it a good buy, unless there’s another brand/models you would recommend.
Thank you!
PS is there any resources in the UK that support or spread knowledge of right to repair as i would like to get involved.

Is it possible to obtain a wiring diagram for Bosch WAE24063GB/27 washing machine model?
I’ve replaced the pressure switch with a new one. The pressure switch operates at the working fill level (I can here a click and measure the change in continuity using a meter). It also activates the pump out when it hits max level.
Pressure hose and chamber are all clear and ok.
I’ve checked all connections to the main PCB and there is continuity on the wires between the contacts on the PCB and the pressure switch. It appears that the one leg of the heater is supplied via a the pressure switch but I would like to confirm this via diagrams.
The fault was intermittent but now is constant. Suspect PCB?

this is zanussi -electrolux, have been using this machine for many years now , only this week that i noticed a harsh sound when washing only – or while getting water.