Hi love all your videos. I have a Beko DCU8230 Condenser Tumble Dryer. I couldnt find one that showed how to change the front felt support system. The dryer works fine, its clean but it is noisy. There is a lot of play at the front of the machine suggesting the felt and associated bearing pads need replacing. Can you help? Many thanks martin
- Parts
- FAQs
- Tutorials
Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page.
Having trouble with layered Navigation? Watch Video
Grundig GTN38240GCW Heat Pump Tumble Dryer Condenser Lift Pump Is Continuously On When Turned On At Mains

Grundig GTN38240GCW Heat Pump Tumble Dryer’s pump failed so replaced with genuine new pump and float switch.
Now the pump is on continuous when machine has mains supply regardless of if machine is on or off. Looked at float switch, activating correctly when compressed stopping cycle but not pump. Took machine apart and followed your service video.
No obvious issues. Don’t think it’s the pump or float switch. Maybe whatever sends signal to pump?? Any help greatly appreciated thanks for your time. James
Beko DTGC7000W Condenser Tumble Dryer Tank Full Error
Beko DRCS68S Condenser Tumble Dryer Element Gone
Beko DTBC10001W Condenser Tumble Dryer Has No Power At All

Hello, Im wondering if you can help. My Beko DTBC10001W condenser tumble dryer just stopped working. It Was working perfect but there’s no power coming to it now… I have checked plug and socket and they are all fine I have checked plugs going into pcb with multimeter and the plug that goes into the pcb right behind the electric display isn’t showing any reading. I have tried tracing it but it goes around the front of the drum. I thought it connected to ntc but they were small orange wires and I tested that and that was OK.. These small. Wires are white but covered in black all way down. The pcb board looks fine doesn’t look like anything burn or woren. This is tumble dryer is 2 years old. Do you know what is causing no power to come to display all other plugs in pcb are getting reading on multimeter… Thanks alaina
How To Maintain Your Beko BM3T3822W Heat Pump Tumble Dryer Effectively?
Neff Siemens Bosch Tumble Dryer Pump Fault | Not Starting & Container Light Flashing
Hoover & Candy Tumble Dryer Capacitor Replacing | Tumble Dryer Not Turning
Tumble Dryer Float Switch This video shows you Hoover and Candy tumble dryers flashing the full water indicator light. This is most commonly caused exactly because the water container is full of water, so make sure to empty it every time you dry clothes on it. The other error that may cause this is possible the pressure




