Beko DTKCE80021W Tumble Dryer’s motor is struggling to start the drum. With the side panel off the drier starts with a slight push. I can send a video if that helps.

I have a Altus ADSV6 tumble dryer. Since disconnecting the wiring loom from the circuit board the machine fails to start. There is one plug with 3 blue grey white wires connected to it, and I can’t find 3 pin socket on the circuit board where this plugs into.Please help Thanks

As per your instruction video, I need to replace the MSC.
Can you please tell me which part I need, the cost and when you can deliver.
Thank you.

front panel lights up press start flashes red not starting pnc number 91609737900

I need to source a 7uf capacitor can you help?
Thanks so much for the speedy reply. Just one more question. The capacitor you recommend is the same spec but the one I’ve removed is shorter in length. I’ve noticed mine looks more like a hotpoint/indesit one than the candy ones I’ve seen online. Its length measures 58mm excluding thread and terminals and with its 35 mm diameter looks stubbier than the one you have.The body is also metal. Does any of this matter? There is plenty of clearance at the back of the capacitor to accept a your longer capacitor so I’m hoping all will be well. Please advise. Thanks. Lee