My Zanussi ZDH8333W Heat Pump Tumble Dryer sometimes stops during the cycle. I’ve been trying to diagnose this issue, which seems to be due to the machine overheating and then stopping. I have cleaned out a HUGE amount of fluff from inside the machine (top, both sides and back removed, and replaced). We have seen Err 71, which I believe points to the NTC1 temperature probe.
I found a page of yours giving an answer to E63 on the same model, and helpfully the wiring diagram and exploded views.
https://www.how-to-repair.com/faqs/zanussi-zdh8333p-heat-pump-tumble-dryer-shows-e63-error-code/
However I’m unable to locate the temperature probe in the machine to be able to test it – can you suggest where it is?
I see it shares a loom (and J7 connection to the main board) with the Condense tank sensing – so guess it is in a similar location? If so, is that under the cover marked as 403A on the 3rd exploded view?
The machine is heating/drying OK otherwise – and will continue the cycle once it has cooled down and restarted. Plenty of water being extracted.
PS – I can’t find a parts list on the E63 page, seems to be missing

Hi Paul, I have a Grundig GTN38250HGCW Heat Pump Tumble Dryer.
Before I take any further action, I wanted to reach out to you about my problem before deciding whether to buy a new one or have it repaired. A couple of days ago, my tumble dryer stopped on program 6 and won’t change to any other program. The filters are clean, and I’ve also tried resetting it, but nothing seems to work. I searched for videos online but couldn’t find anything helpful. Hopefully, you can help me out. We’ve had this tumble dryer for the last 5 years, it’s been used a lot but well taken care of.
Looking forward to your response, hopefully with a positive solution.
Thank you,
Rafal

I have a Beko DPHX 80460W Heat Pump Tumble Dryer
Viewing your video, looks like it may be a faulty relay on the circuit board.
Circuit board P/N 2982590100.
Relays RL1 RL3 RL4 all same 10a 250vac 5RD-SH-10506-F-C
Relay RL2 10a 250Vac HF3FA 005HSTF(310)(925)
Heater plug socket KN9.
Can you identify the heater relay number?
Please could you quote a price for a new relay.
I can e-mail photos if you could give me an address to send them to if that’s helpful.
Thanks
Harry Cossar.

I have a Beko DHX83420W Heat Pump Tumble Dryer. Where the door latch connects in the machine this small piece of plastic has broken off. How do I fix this?

Hi love all your videos. I have a Beko DCU8230 Condenser Tumble Dryer. I couldnt find one that showed how to change the front felt support system. The dryer works fine, its clean but it is noisy. There is a lot of play at the front of the machine suggesting the felt and associated bearing pads need replacing. Can you help? Many thanks martin