Hello, Paul. After aborting a rinse program midway my Beko WRE6411BWW washing machine started acting up. I tried all programms, but none will start. The door locks, then the machine gives a quiet “electrical humming” sound for ~5 seconds and then nothing. It stay like that indefinitely, the pump doesn’t start, the drum doesn’t turn. When I manually turn the drum there is a slight rattle, as heard in the video. I tried running diagnostics, got E29 which says is an electrical fault? When attempting the test cycle, nothing happens at all as you can see in the second video. What are my next steps? Check the carbon brushes and the motor control module? I can’t really find any diagrams or anything other than the user manual online. Thanks for the help in advance.
Video1: https://www.youtube.com/shorts/etNoIo8QryE
Video2: https://www.youtube.com/shorts/oP3hfHuPioc

I have LG F4V509WSE Washing Machine. DP2 fault on the display,taken door lock mechanism off and waters got inside and rusted springs. Help me please.

hi paul hope you are ok. lovely youtube channel must admit. I have lg wm3770hwa washing machine and recently it shocks me with the error code. it display de2 error code. what should I do? do I need to replace a part? if so do you sell?

Hİ paul hope you can solve my hotpoint aqd1170d69 washing machine problem. Before this problem occurred i couldn‘t turn the machine off. The on and off button is always on and can not turned off. I pulled the plug out.many thanks from Germany

Model: WM3570HWA and Serial: 501PNCY2B483
My LG WM3570HWA washing machine is throwing a DE1 error message. It locks the door when I try to start a wash cycle but then immediately displays DE1. If I cancel the wash cycle, the door will not unlock and I can hear a two clicks near the top, back left of the machine. I have to pull the power cord to open the door. Does this still sound like a door interlock issue or something else?