You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page.
Having trouble with layered Navigation? Watch Video
January 20, 2018 
I have the motor out but do not see the a part # on the brush but I can provide any # off of the C.E.SET motor that is needed. I also need a belt for this as well and if you could tell me how much these parts are roughly in US dollars it would be helpful.
May 4, 2017
Brushes for C.E.SET Motor MCC 61/64-148/WHE14 461970428301
April 11, 2017
I have searched for carbon brushes for our washing machine but I don’t seem to find it for our model.
Can you help me find it?
On the tag on the engine/motor you can find following:
ACC
Type: 20584.624
EAN: 461975033651
15650000 BE
pictures of the engine and some picture of the carbon brush.
I hope you can help us by seeing this pictures:)
October 10, 2016
How to wire up a 6 pin universal ac 240v motor on a washing machine. AEG, Ariston, Baumatic, Beko, Bosch, Bush, Candy, Creda, Electrolux, Hoover, Hotpoint, Indesit, LG, Samsung, Servis, Siemens, Smeg, Tricity Bendix, Whirlpool, Zanussi, ETC
January 29, 2021
Service and start lights flashing and wash and rinse lights staying solid green ( lights 2 and 3 from left to right).
When put on drain cycle, you can hear the pump going fine. Tried spin cycle but flashes error code straight away. Checked and emptied pump and both carbon brushes are fine. Any help would be great. Many Thanks, Marc
June 11, 2024
This video we show you how to replace washing machine carbon brushes, we are working on a Bosch but this guide is good for Balay, Neff & Siemens. To order your washing machine motor carbon brushes you will need your full model number (This is normally around the washing machine door frame on a sticker)
June 11, 2024
If your Fagor washing machine is not spinning or it is filling with water but the drum is not turning then it is a good chance that you Fagor carbon brushes have worn out. This video will show you how to replace Fagor washing machine carbon brushes with a Selni motor, we are working on
May 29, 2024
Replacing a drum on a washing machine is not as complicated as you might think. The big problem arises with the cost of the drums because manufacturers are constantly using sealed washing machine drums. You are unable to replace the bearings or the spider which is totally unfair on the consumer.
May 1, 2024
To order your carbon brushes for your washing machine, you will need the full model number of the ID Plate, which you can normally find on the inside of the door frame or in the rear of the machine. Sometimes you will need the 12 digit number, which is usually prefixed with 12NC in front of
September 25, 2021
This video will show you how to replace washing machine carbon brushes on Hotpoint, Creda, English electric Etc, early models only this is a step by step procedure on the process. To order your washing machine motor carbon brushes you will need your full model number (This is normally around the washing machine door frame
