My daughters washing machine has an intermittent problem, and I’m hearing some weird noises from the pump on some cycles it completes, but on others it stops with water in the drum. This model doesn’t have a removable kick plate to access the screws to remove the drain pump. Would the whole front panel need to be removed? Can the motor body be removed for cleaning and repair from the housing in situ from below with the machine on its side, thus avoiding the need to remove the complete pump?
- Parts
- FAQs
- Tutorials
Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page.
Having trouble with layered Navigation? Watch Video
Beko Washing Machine WDR7543121W Drain pump broken

The propeller on the drain pump went off so the whole drain pump needs to be changed. I have ordered one from your site and am currently looking at how to do the job myself. Looks like I have to remove the panel – can you please share the details on how to do it? Thank you, will surely buy you a couple of pints 🙂
Beko WMB71642W Washing Machine Shows Error Code 15 & Error Code 10

Good Afternoon, I’ve been watching your videos with keen interest. I have the Beko WMB71642W washing machine which isn’t always draining fully on first attempt. The drain pump had become noisy so have changed it for the second time now and am just wondering whether you have any advice, before my wife gets her way with buying a new machine? I was wondering whether it is the pressure switch or hose and just saw your disassembly video, so was just wondering whether a clog in the the drum where the pressure hose connects can be checked before replacing any more parts?
Thanks in advance,
Mark.
Beko WRE6411BWW Washing Machine Shows E29 Error – No Program Will Initiate, Not Drawing Water, Drum Not Turning

Hello, Paul. After aborting a rinse program midway my Beko WRE6411BWW washing machine started acting up. I tried all programms, but none will start. The door locks, then the machine gives a quiet “electrical humming” sound for ~5 seconds and then nothing. It stay like that indefinitely, the pump doesn’t start, the drum doesn’t turn. When I manually turn the drum there is a slight rattle, as heard in the video. I tried running diagnostics, got E29 which says is an electrical fault? When attempting the test cycle, nothing happens at all as you can see in the second video. What are my next steps? Check the carbon brushes and the motor control module? I can’t really find any diagrams or anything other than the user manual online. Thanks for the help in advance.
Video1: https://www.youtube.com/shorts/etNoIo8QryE
Video2: https://www.youtube.com/shorts/oP3hfHuPioc
Beko WM5100W Washing Machine Has Power & Lights But Won’t Start Washing

Hi I have a Beko WM5100W Washing Machine. It has power and lights but won’t start washing. The wash light did light, but the cycle didn’t start. And then when I didn’t the cancellation process (hold start for 3 seconds), the End light lit, but the cycle hasn’t ended. Can you please give me any ideas for how to diagnose what the fault is, so I can replace the relevant components?
How to Unblock or Replace Beko Washing Machine Pump

Important notice on Beko WM6143B, WM6143S, WM6143WBefore entering test mode please be aware that you are not meant to leave the washing machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the drum
Bosch & Siemens Washing Machine Won’t Drain (E36-10 Error Code)

Dealing with a Bosch WAN28259GB washing machine that won’t drain or empty is one of the most common service calls we get. If your Bosch or Siemens washing machine is flashing the E36-10 error code (or the older E18 or E03 on classic models), it’s telling you one thing: washing machine couldn’t drain the water […]
Beko WMC1282W Washing Machine Error Codes & Diagnostic Test Mode (Full Guide)

In this guide, we’re focusing on the Beko WMC1282W washing machine. I’ll walk you through how to enter the machine’s diagnostic test mode and what all the error codes mean. This is the essential first step for correctly identifying any faults before you start a repair. The specific machine featured in our video had an […]
How To Maintain Beko DTKCE80021W Condenser Tumble Dryer to Prolong the Lifespan?
How to Clean a Tumble Dryer Condenser Box Unit In this guide, we will explain how to clean the condenser box in your condenser tumble dryer. This guide applies to all brands of tumble dryers, including Electrolux, Zanussi, AEG, Hotpoint, Creda, Ariston, Beko, Bosch, Neff, and Siemens. Keeping your condenser box clean and efficient can
How To Replace A Washing Machine Drain Pump? | Creda & Hotpoint Washing Machines

This washing machine tutorial will show you what to do if the washing machine does not drain or empty the water out, this repair was done on a Bosch, Neff and Siemens type appliance. After checking that the pump is faulty in our previous tutorials you will need to replace the old washing machine pump
