I have a Beko DRCS68S Condenser Tumble Dryer. I think the element has gone. Yeh tumble dryer trips the electric when it’s plugged in and turned on. Do you sell a replacement element for this model?

Hello. I’ve watched your various videos on the above. Very good thank you. I have a Zanussi ZDC8203W Condenser Tumble Dryer.
The mains power is reaching the heater unit and checked across both connectors with m/meter and it’s 240. There is no continuity beep however across the terminals when the mains connectors are removed. Does this mean the element itself needs replacing. If so do you supply these?
Sorry I’m not sure how to upload a vid to YouTube but can send a photo if that’s possible
Thanks
Neil

TVM for the advice on your YT channel video.
My Zanussi ZDC8202P Condenser Tumble Dryer heater unit (manufactured 2009) has exact same connector type, except that the white-sheathed earth runs separately alongside from the terminal block through the rubber grommet then terminates at a clamp on top of the heater unit housing.
The grommet on mine is oblong and looks like I’ll have to slit the opening a bit with knife in order to pull through both cables as well as the terminal block.
I’m waiting for new heater part, but I’m doubtful whether it will be like my old one. Assuming it is the same as in your video, any tips to adapt the wiring to suit my machine please?
Tim

Hi there, I’m ready to chance element with the help of your videos. Unfortunately I cannot get the original 2450w element, would a 2500w be safe? Thank you.

I tried looking for an element 421309205521, on your ebay shop but failed. Do you still do the EGO elements for this machine?
Looking at other shops, very few list the maker for the elements