You can refine your search further by entering make and model number if you are looking for parts.
If you are looking for tutorials please use appliance type only.
If you need help please use
FAQs or ask a question in contact us page.
Having trouble with layered Navigation?
Watch Video
I am looking for information regarding the bearings replacement for my Bosch WVD24460GB/05 washer dryer, I found a bearing cross, but. O ideas if I can just purchase the bearings and a new seal or if the bearing cross is the item I need. Also no instructions on this?
During a spin cycle at 1,000 rpm there was a thump and the noise level increased significantly. After removing the load, there was a smell of burning rubber and it was apparent the inner drum was not spinning concentrically to the outer drum – at one spot the gap goes from 10 mm to 18 mm and was rubbing on the seal causing the burning smell. I cannot detect any play or noise in the bearings. Cracked/broken spider perhaps? Bosch WAE24166GB washing machine is 14 years old.
Dealing with a Bosch WAN28259GB washing machine that won’t drain or empty is one of the most common service calls we get. If your Bosch or Siemens washing machine is flashing the E36-10 error code (or the older E18 or E03 on classic models), it’s telling you one thing: washing machine couldn’t drain the water […]
If your washing machine has a leak or the seal has just gone mouldy with black marks on it then you might need to replace it and fit a new oneTo order your door seal you will need your full model number. (This is normally around the washing machine door frame on a sticker) If
October 28, 2024 
