I have Bosch WFVC8440UC/19 washing machine. There seems to be a leak in the tub above the drive motor where the company filled a seam/gap with some sort of black glue. Is this seam standard on tubes?

Greetings Paul
Very helpful videos on your YouTube channel !
Could you tell me where i can find the codes for :
Bosch 500 series WAT28401UC/12 washing machine
The only code I know is the child lock.
I am looking for the codes to reset the electronics / sensors. ( aside from turning off the breaker which doesn’t do anything really )
I’ve seen you doing a reset technique with another model …. but it doesn’t seem to work on my machine.
I have no error messages. But the machine keeps telling me the door isn’t closed (even if it is.)
Thank you so much for your time. Any information would be greatly appreciated

During a spin cycle at 1,000 rpm there was a thump and the noise level increased significantly. After removing the load, there was a smell of burning rubber and it was apparent the inner drum was not spinning concentrically to the outer drum – at one spot the gap goes from 10 mm to 18 mm and was rubbing on the seal causing the burning smell. I cannot detect any play or noise in the bearings. Cracked/broken spider perhaps? Bosch WAE24166GB washing machine is 14 years old.

Bosch WAE24167GB/85 washing machine big noise, then drum not moving.
Band intact but off. Continued program… motor good, drained etc as usual.

Hi paul, great video on bearing change. I have Bosch WAN28080GB/26 washing machine and also I’ve found the drum seal and bearing seal.
How do I buy the bearings please?
Thanks Barry