Hi, I have Bosch WAN24100GB/24 Washing Machine and whatever programme I try, it stops after 10 seconds.
There is no error code. I have to open the door manually and reset the machine, but the same thing happens.
I have replaced the door interlock and the pressure switch. Both PCBs look fine to the eye with no obvious fault. I’ve checked the motor (it does not have carbon brushes) and cleaned the pump. Still, the same problem – starts ….and then stops after 10 seconds. I have a video if that helps.
Thank you so much. Rohan

Hi Paul, hope you are ok. My BOSCH WAS32791ME/23 washing machine’s drum is rubbing in 1 location. I suspect there is a broken spider or something else. I need your expert view and maybe some spare parts. Looking forward to hearing from you.

My Siemens washing machine is a relatively new design. However the machine does not respond to any button pressed. Is there a way to reset the board please?

Hi Paul I am thinking of buying a new Bosch serie 4 washing machine could you please tell me if the current Bosch model washer WAN28281GB has a replaceable bearing and is not the sealed type. Thank you

Looked at Pauls Video and need to replace carbon brushes. Links on your page point to other stores. Any recommendation for replacements? One site give model number but brushes in photo are not angled.