the detergent tablet is not dissolving. Making quite loud humming noise when running.
Its not spraying water very powerfully the spray arms are not turning (I’ve cleaned them out) but water is coming out, the water is hot essentially it seems to be steaming the dishes free rather than spraying them clean
Cleaned the filter, its draining fine
Checked drain sump no blockage
Does it sound like it needs a new circulation pump?

Hi Paul,
The dishwasher empties at start of program but does not take in water. My first thought is a fault with inlet valve but having watched your videos and read how it works, I wonder is it worth replacing the impeller jug also?
Thanks,
Steve.

Hi Paul, looking for some help here. I am looking at a dishwasher that falls up and circulation pump kicks in however only get water coming out of lower wash arm. I suspect the circulation pump is at fault? However, I would suspect water coming out of lower wash arm instead of top? Any info would be appreciated.
Ian

Hi,
This started a few weeks ago. The error code was intermittent, and just banging the door cleared it. I cleaned the filter, checked the air gap and hose to disposal to ensure they were clear. I also cleaned the water inlet where there are debris filters and found they were almost clogged with calcium. That made it worse. E 24 stayed on. Replaced the control panel in door top, the drain motor, the check valve, and cleaned the matrix. Had a e15 after running having cleared the E 24. Took it apart and cleaned the water. It ran successfully but kept running with 17 minutes Displayed on screen. What may I be missing?

Dishwasher runs through cycle, it fills with water and empties at end but the water doesn’t get pumped through the spray arms fast enough to make them spin. Also the cycle is taking longer than it should. What do you think is the fault?