Beko WM5101W washing machine will fill, turn drum in both directions, heat water then continue to turn one way for 10 seconds (approx), pause for ten seconds, then turn the other way for ten seconds for as long as I care to let it. Up to 20 minutes before I give up waiting for a drain and refill, and press and hold ‘Cancel’. The machine immediately stops, runs the pump to empty the suds and lights ‘Spin/End’. Can you advise, please, why the machine will not follow through any wash program, and what a solution may be?
With thanks.
( I found you on YouTube and am a subscriber)
(

Hi I have a Beko WTB741R2A Washing Machine. I’m looking to possibly replace the motor and PCB board of this washing machine. From Saturday (21st Dec. ) it started tripping my electrical fuse box while running a “dark care” cycle. It completed the cycle but when I went to use it Sunday the machine would only fill with water and the drum would not spin. On further research I found it had an E11 error code and further research from your video on this code leads me to believe I require a new/second hand refurbished motor and the accompanying PCB Board as explained in your Video. Do you currently have such items in stock? Many Thanks, Noel Warn

Beko WDIK754421 washing machine’s board does not correspond to the circuit diagram for this machine, it is P/N2856540100.
Board needs replacing as TRIACs and surface mount resistors that drive the inlet valves destroyed. No short found on valve coils so want to find what caused flash/bang so a circuit diagram would be very helpful for the machine or board.

My Beko wec84p64e2w washing machine has started to shake on spin cycle, could do it be the shock absorbers?

I have a Beko WM5100 Washing Machine. Spin/drain missed off the program. Goes straight to the end of the program and can be opened. Separate spin/drain will do the job after a couple of tries. All items working in test mode.