You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page.
Having trouble with layered Navigation? Watch Video
September 3, 2025 
I have a Whirlpool BI WDWG 961484 UK Washer Dryer. It washes fine just will not dry at all. No error messages. Loved your video on washer dryers but would like to know if there are any hidden diagnostics on this machine and how to test HTCs and thermostats. Brian Mack Sorry to hear about […]
August 14, 2025
Hello, I have a beko DTBP10001W heat pump tumble dryer, 6 years old. I watched your youtube video here, which was very helpful – https://www.youtube.com/watch?v=89itrIObARA and this https://www.youtube.com/watch?v=yoXVEv4XGzQ For mine – the clothes are not getting dry, after 8+ hours of use. The drum turns, the clothes seem warm (my wife thinks not as warm […]
August 1, 2025
I believe I have a motor capacitor issue. I have located the motor of my tumblr however can’t see the capacitor so I wanted to check whether I have a BEKO DTKCE80021W Condenser Tumble Dryer that has a capacitor built into the motor or if I should be able to change it myself.
March 25, 2025
I have a Beko B3T48231DW heat pump tumble dryer and i it is leaking water from the base and when opening the front panel where the evaporator is, This was full of water. The water is not getting to the rear collection tray where the pump is located. I fear the coil (s) are blocked and has blocked the drainage hole going to the pump area. Is this a full strip down with drum out?
March 25, 2025
My Zanussi ZDH8333W Heat Pump Tumble Dryer sometimes stops during the cycle. I’ve been trying to diagnose this issue, which seems to be due to the machine overheating and then stopping. I have cleaned out a HUGE amount of fluff from inside the machine (top, both sides and back removed, and replaced). We have seen Err 71, which I believe points to the NTC1 temperature probe.
I found a page of yours giving an answer to E63 on the same model, and helpfully the wiring diagram and exploded views.
https://www.how-to-repair.com/faqs/zanussi-zdh8333p-heat-pump-tumble-dryer-shows-e63-error-code/
However I’m unable to locate the temperature probe in the machine to be able to test it – can you suggest where it is?
I see it shares a loom (and J7 connection to the main board) with the Condense tank sensing – so guess it is in a similar location? If so, is that under the cover marked as 403A on the 3rd exploded view?
The machine is heating/drying OK otherwise – and will continue the cycle once it has cooled down and restarted. Plenty of water being extracted.
PS – I can’t find a parts list on the E63 page, seems to be missing
December 3, 2014
This video will show you How a condenser tumble dryer works & How to diagnose problems and find the fault the difference between the two types of dryer are Vented tumble dryers work by expelling warm, damp air through a hose and out of an open window or a vent installed in an external wall. The
September 12, 2014
If your Hotpoint, Indesit, Ariston, Creda or Proline tumble dryer is not drying? If the drum in your dryer no longer rotates or turns, the chances are your drum-belt may have snapped or worn.This video will show you How to replace a tumble dryer belt in a Hotpoint, Indesit, Ariston, Creda or Proline machine
May 16, 2024
Beko Condenser Tumble Dryer How to Repair Beko Condenser Tumble Dryer? Ultimate Repair Guide for Tumble Dryer Leaking Water We will fix your problems in this repair guide for Beko condenser tumble dryers! Whether you’re experiencing issues like a persistent water tank light, leaking tumble dryer, or simply want to ensure optimal performance, this guide
January 18, 2018
Your tumble dryer is not heating? Could Be One Of The Following: If you have a Tumble Dryer that is not heating up but the drum is turning ok, then the chances are the thermal overload cut-out has tripped or the heater might have blown. Some older dryers have a red reset button on the
January 13, 2015
If you find that you have to replace the belt, motor or bearings on your 6th sense tumble dryer made by Whirlpool, Bauknecht, Laden, Maytag, this video will show the basic techniques for doing this.
