You can now ORDER wide range of new and second hand spare parts for your household.

  • Parts
  • FAQs
  • Tutorials

Refine your search


You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page.

Having trouble with layered Navigation? Watch Video

How do I find my model number?


Model Number Example Click Here
We're busy building a brand new shop! In the meantime, find what you need at our partner website.

Beko DTBP10001W Heat Pump Tumble Dryer Not Drying

Hello, I have a beko DTBP10001W heat pump tumble dryer, 6 years old. I watched your youtube video here, which was very helpful – https://www.youtube.com/watch?v=89itrIObARA and this https://www.youtube.com/watch?v=yoXVEv4XGzQ For mine – the clothes are not getting dry, after 8+ hours of use. The drum turns, the clothes seem warm (my wife thinks not as warm […]

Beko B3T48231DW Heat Pump Tumble Dryer Leaking Water From the base

I have a Beko B3T48231DW heat pump tumble dryer and i it is leaking water from the base and when opening the front panel where the evaporator is, This was full of water. The water is not getting to the rear collection tray where the pump is located. I fear the coil (s) are blocked and has blocked the drainage hole going to the pump area. Is this a full strip down with drum out?

Zanussi ZDH8333W Heat Pump Tumble Dryer Sometimes Stops During Cycle/Time Resets & Shows Err 71

My Zanussi ZDH8333W Heat Pump Tumble Dryer sometimes stops during the cycle. I’ve been trying to diagnose this issue, which seems to be due to the machine overheating and then stopping. I have cleaned out a HUGE amount of fluff from inside the machine (top, both sides and back removed, and replaced). We have seen Err 71, which I believe points to the NTC1 temperature probe.
I found a page of yours giving an answer to E63 on the same model, and helpfully the wiring diagram and exploded views.
https://www.how-to-repair.com/faqs/zanussi-zdh8333p-heat-pump-tumble-dryer-shows-e63-error-code/
However I’m unable to locate the temperature probe in the machine to be able to test it – can you suggest where it is?
I see it shares a loom (and J7 connection to the main board) with the Condense tank sensing – so guess it is in a similar location? If so, is that under the cover marked as 403A on the 3rd exploded view?
The machine is heating/drying OK otherwise – and will continue the cycle once it has cooled down and restarted. Plenty of water being extracted.
PS – I can’t find a parts list on the E63 page, seems to be missing

Everything About Indesit I1D80WUK or Hotpoint H1D80WUK Vented Tumble Dryer

Search and purchaseTumble dryer elements This video with help you repair your faulty heating system on Hotpoint indesit tumble dryers with a heater element, thermostat, Ntc senor  This video will help you diagnose the fault with Hotpoint & Indesit tumble dryers that are not heating, and how to repair them.Both condenser and vented tumble dryers use very

Indesit/Hotpoint Tumble Dryer Not Heating | How To Check & Test The Thermostat On The Heating Element

Search and purchaseTumble dryer elements This video with help you repair your faulty heating system on Hotpoint indesit tumble dryers with a heater element, thermostat, Ntc senor  This video will help you diagnose the fault with Hotpoint & Indesit tumble dryers that are not heating, and how to repair them.Both condenser and vented tumble dryers use very

How to Replace A Belt, Bearing, Capacitor & Motor On Hotpoint, Ariston & Indesit Tumble Dryer

Search and purchaseTumble dryer elements This video with help you repair your faulty heating system on Hotpoint indesit tumble dryers with a heater element, thermostat, Ntc senor  This video will help you diagnose the fault with Hotpoint & Indesit tumble dryers that are not heating, and how to repair them.Both condenser and vented tumble dryers use very