Diagnosing faults on washing machine Motors and testing them
Most ACC washing machine Motors ( Sole - C.E.SET - Nidec) are either 6 pin 7 pin or 8 pin This normally means that they are have up to 4 Field Windings 2 of the wires will be going to the tachometer which controls the motor RPM speed, another 2 wires will be going to the right and left carbon brush
These motors are normally used on makes like:
Candy, Falcon, Friac, Helkama, Hoover, Howden, Philco, Rosieres, Terzismo, Xperial, Zerowatt,
AEG, Arthur Martin, Electrolux, Elektro Helios, Faure, Fors, Franke, Husqvarna, Ikea, John Lewis, Juno, Nordland, Privileg, Rex, Rosenlew, Silentic, Tricity Bendix, Zanker, Zanussi, Zoppas,
Acc motor test rig wiring for 6 min motors
always check your wiring configuration before testing the motor
Bosch washing machine is fitted to a wide range of machines listed below, Motors are either 6 pin, 7 pin, or 8 pin. This normally means that they have up to 4 Field Windings 2 of the wires will be going to the tachometer which controls the motor RPM speed, another 2 wires will be going to the right and left carbon brush One of these wires normally go through a heat sink protection unit Something like a Klixon 15AM213A This is here to protect the motor if it ever got exceedingly hot, this stops the motor Catching Fire.
These motors are normally used on makes like:
Balay, Bauknecht, Bosch, Constructa, Crolls, Daewoo, DeDietrich, Gaggenau, Hitachi, Koenic, Kuppersbusch, Laden, Lynx, Merker, Neff, Novamatic, Pitsos, Profilo, Schulthess, Siemens, Superser, Thomson, Viva, Whirlpool,
Bosch, Neff, Siemens motor test rig wiring for 6 min motors
