Elitech ATC-800+ dual temperature thermostat + Digital Auto Aquarium

Email To A Friend


write something smart
Write Your Own Review
You're reviewing:Elitech ATC-800+ dual temperature thermostat + Digital Auto Aquarium
Your Rating
Features: -An all-in-one package works with both heating and cooling system; -Control temperature by setting the temperature setting value and the difference value; -Easy-to-read large LCD display; -Alarm warning when temperature exceeds measuring range, or sensor open circuit or short circuit -Built-in short circuit sensor; -Automatic control for aquariums and other systems that require constant regulation-avoid hassle of monitoring your aquarium environment; -Temperature calibration; -Switch the modes between cool and heat -Refrigerating control output delay protection; -Alarm when temperature exceeds temperature limit or when sensor error(when the controller sensors open or short circuit ). -Fully salt water safe probe; -Easy to install and use; -Sturdy plastic unit; -Wiring diagram provided. Specification: -Temperature measuring range: -50°C ~ +99°C -Relative humidity: 20% ~ 85% (No condensate) -Resolution: 0.1°C (-19.9~99°C) -Accuracy: ±1°C (-50°C ~ +70°C) -Sensor error delay: 1 minute -Power supply: 220V AC ± 10% 50/60Hz -Power consumption: <5W -Sensor: NTC sensor (1 PC) -Relay contact capacity: Cool (20A/250VAC); Heat (10A/250VAC) -Ambient temperature: 0°C ~60°C -Storage temperature: -30°C ~75°C Dimension: -Front panel size: 180mm x 100mm (LxW) -Mounting size: 170mm x 90mm (LxW) -Product size: 180mm x 100mm x 57mm (LxWxD) -Cable length: 6.6ft /2 M ( including the probe) -Weight: 410g