Hi Paul. I have Electrolux EDH3284PDW tumble dryer. It shows e60 error code. Any tutorials or videos on how to install magnetic strip piece to machine?

Hello Paul, I have a problem with my Electrolux EDI97170W tumble dryer. I can turn the machine on but the motor doesn’t work . The belt, the motor and the capacitor are ok but I don’t have a voltage on the motor. Do you have a wiring diagram? Could you please help me?

Watched your video online. Took the cover off the back of the Candy GVS C9DCGB-80 tumble dryer, disconnected the cables from the 2 thermostats and the one on the left hasn’t got continuity. I’m guessing that’s the issue?

I have Hoover 8.5kg Link X Care Vented Tumble Dryer HLXV85TGX-AUS model. I am trying to locate the source of a “bump bump” noise that happens with each rotation of the drum. The sounds appears to align with the same point of the drum. I just uploaded a video of my machine making the noise https://youtube.com/shorts/kaVjhq-sNms?feature=share.

I have watched it while running with the top and lower front panel off and cannot see anything obviously wrong. I have felt the drum edge against the front rollers as I spun the drum by hand and there is nothing that would make the noise. I also can’t get the noise to happen by just spinning the drum by hand, only when it is running. Any idea what it might be? Otherwise do you think it is safe to just use with the noise? It is a brand new machine that I haven’t used yet. But I bought it off Facebook (still in the packaging) so no chance for warranty. Any advice you could give would be really appreciated! Thanks.

Hoover NDE H10A2TCE 80 tumble dryer drum won’t turn and there’s a humming noise, drum went when I manually pushed drum round, I changed the capacitor, as it said to in your video but tumble dryer still not turning, anything else it could be?

I’ve been watching your videos on YouTube, and I found the ones about condenser dryers very interesting, especially regarding blockages. I’m hoping you can help me with my Beko B3T4823DW heat pump tumble dryer. It used to take two hours to do a load, but now it takes three to four hours, and sometimes the clothes aren’t even dry.

The dryer is heating the clothes because when I open the door mid-cycle, they feel warm and there’s steam inside. However, for some reason, the water isn’t collecting. Could you explain what might be wrong? Also, could you provide a diagram of my machine and instructions on how to take it apart? I’d like to access the coil just inside the front panel, which is clogged with fluff and greasy grime. Any additional videos on dismantling the machine would be much appreciated.

Hi Paul, we have a Hotpoint TDWSF83BEPUK condenser tumble dryer, I’m wondering if F19 Error is a heating element on this tumble dryer and if replacing it would resolve the issue.

One was wondering if you could advise us on it. It’s probably not rocket science to replace a heating element at the rear. I’m pretty confident I can fix it myself. Just needed to know if you think the error code F19 is an heating element issue. Or know the part number I need to replace it.

Thanks James

Inherited Bosch WVTI2842 washer dryer; but the door button seems to be partially depressed so is difficult to work. Can I replace the button? kind regards, Carole Gough

Panda PAN60SF compact portable electric dryer stopped working, but I noticed if I stick something small like a pen into the hole on the dryer the dryer would run. I know that there is a prong on the dryer door that goes into the hole of the dryer that starts up the dryer. I’m thinking that the part inside the dryer that the prong goes into is what is bad. I’m not sure if it’s called the safety switch or door switch. Can you please tell me what you think it is. Do you also sell the part that I need? Thank you very much

My Hoover HDB 854DN/1-80 washer dryer shows E08 code and there is no sign or sound of motor action. Probably requires new set of motor brushes. Do you have these in stock?