June 9, 2020 
Hi Paul, liked your repair videos, thank you. This washer/dryer has a heat pump system for its dryer and does not warm the air when drying. In test mode, I can hear the compressor kick in once, and what looks like a temperature read out, stays at 27-28C when testing. I am comfortable using a multimeter etc and wanted your help to isolate the issue. Could you let me know where I should start? Thanks! Koray
Koray Ipek
Paul answers
I will try and help with this problem AEG L99699HWD washer dryer
there were 4 models of this machine so be careful when ordering parts
| L99699HWD | 914605901 | 00 | 20140403 |
| L99699HWD | 914605901 | 01 | 20150409 |
| L99699HWD | 914605910 | 00 | 20150729 |
| L99699HWD | 914605910 | 01 | 20170614 |
first, you need to make sure that you have the correct voltage at the heating element and test the element is good, you should also have a trickle of water going through condenser plate, the fan should be turning at the correct speed. all these components need to be checked.
some models there is a compressor fitted. these are highly complicated and not easy to fix. if the compressor is running when on the drying cycle there is a good chance that you may have a leak on the gas system you will need an engineer to fix this
AEG L99699HWD Combo washer dryer spare parts
3081333If you need any further assistance please feel free to contact me. all the best Paul.
Paul Charmbury
Appliances Engineer
