AEG – T56840L Condenser 7kg Tumble Dryer E51 error fault

Starts ok, runs for 3-4 minutes,then faults,but after a few resets will run through full cycle

Mark Spolton

Paul answers

I will try and help with this problem…

 

if you are getting an intermittent ​error code e51 and you have changed the capacitor on the motor, then there’s a good chance that you have a faulty circuit board this is a common fault on the​se​ circuit boards​, the links switch can go faulty you can try inspecting it with a magnifying glass for any hairline cracks, they are not always visible but I have changed a lot of these and it has cleared the error, I have included a video below showing you what to do, and I have also put some of the parts that we sell for your AEG – T56840L Condenser 7kg Tumble Dryer

 

Only attempt this repair if you are sure that this is the problem

Aeg tumble Tumble dryers videos to help you

Printed Circuit Board Repairs for Tumble dryers AEG, Electrolux, Zanussi Etc

Tumble Dryer fault code errors Aeg, Electrolux, Zanussi Etc

Spare parts for your AEG – T56840L Condenser 7kg Tumble Dryer