Beko BBNIE2300XD Oven Door Hinge Problem Door No Longer Closes Tightly

Hello Paul, I’m having trouble with my Beko BBNIE2300XD oven. The oven door no longer closes tightly—it seems like it’s sagging slightly or not aligned right. I suspect the door hinge might be worn or broken. Could you please advise on how to replace the hinge and where can I buy the spare part?
Adam

I will try and help with this problem about Beko BBNIE2300XD Oven,

Hi Adam, sorry to hear about the trouble with your Beko BBNIE2300XD oven. These ovens use a new hinge system. I’ve got the workshop manual for you. If you go to page 52, it starts explaining the hinge system.

If the door hinge isn’t in the right position, the door won’t shut at the top. Since these ovens are new, it shouldn’t be a fault with the hinge itself. It might have been installed badly, causing misalignment.

If your oven is still under guarantee, I would definitely get the manufacturer to look at it. But first, double-check that the hinges are in the correct position. I’ve also included a wiring diagram and other useful information on test procedures. At the bottom of the page, you’ll find exploded diagrams of your machine with numbers on them. The hinges for your oven are numbered 45 in the diagram. Here is a clickable link to the the genuine spare part (Oven Door Hinge 210480417).

The hinges aren’t expensive, but if it’s under guarantee, you should be able to replace them through the manufacturer if they are faulty. I hope this information helps you get your cooker working again.

In the video, I mentioned about 5 common problems.;

Oven will not heat because the element is faulty.
Oven won’t heat because timer on manual.
Oven won’t heat because of a fault with thermostat or selector switch.
Oven not cooking evenly (one element faulty or fan not working correctly).
Oven not reaching temperature normally an element but possible fan motor.

Coomon Problems with Electrical Ovens

The oven will not turn on

The first thing you need to check is that the oven timer is not on auto if it is, turn it on to manual.

No Heat in Oven

If the fan is running and the thermostat light comes on but you get no heat (or just the thermostat light on in non-fan ovens and cookers) then the probability is that the fan element or oven elements have failed.

Electricity trips (Rcd) when I turn the oven on or grill

This is normally an element that has gone to earth, This is a well-known fault with electric ovens, the insulation breaks down in the elements and trips the RCD , best way is to stick a meter on each element and check that they have not got earth leaks on them. But this can also be a wiring fault.

The grill element doesn’t work

This would usually indicate that the grill element is faulty. Check these: Grill element, Oven changeover switch, Overheat thermostat, Main oven thermostat, if used to regulate the grill temperature.

The oven fan is not working or spinning correctly (slow) or is noisy

The fan motor may need to be replaced see video on this also the cooling fan motor can cause same problems.

The oven overheats and burns everything

Normally this is a simple thermostat failure which would manifest itself as this symptom.

The oven or cooker cuts out after it’s been on for a while

This is an overheating problem which can be caused by the fan motor or main oven thermostat or a faulty safety thermostat that will be causing the problem. It can also be caused by a failure of the cooling fan, where fitted, but usually these go noisy before failing, Safety thermostats are used to prevent the oven or cooker overheating and will shut the oven down.

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page