BEKO OIF21300B COOLING FAN IS RUNNING CONTINUOUSLY

Hi Paul,I wonder f you can help me with issue.I have a built in oven make Beko and cooling fan is running continuously. I have changed I did see on one of your recorded tutorials that it could be a problem with thernostat TOC and I have changed it. Changing this part did not solve a problem. Do you have any Idea what could be a problem? I would not want to spend £200 for a new oven if current one repairable.I hope to hear from you soon.Thanks in advance.Mariusz.
Mariusz Kwiatkowski

Paul answers

Beko OIF21300B Oven Spares

I will try and help with this problem about Beko OIF21300B Oven

if youre oven has the cooling fan running all the time there is normally a thermal cutoff the controls the start temperature of the fan example 80c and this will not shut down until the temperature drops below this.
you should be able to test this using a multimeter and some type of heat source I have not made a video yet on this but I have included some videos below where I talk about thermal cutouts.

In the video, I mentioned about 5 common problems.;

Oven will not heat because the element is faulty.
Oven won’t heat because timer on manual.
Oven won’t heat because of a fault with thermostat or selector switch.
Oven not cooking evenly (one element faulty or fan not working correctly).
Oven not reaching temperature normally an element but possible fan motor.

Common Problems with Electrical Ovens

The oven will not turn on

The first thing you need to check is that the oven timer is not on auto if it is, turn it on to manual.

No Heat in Oven

If the fan is running and the thermostat light comes on but you get no heat (or just the thermostat light on in non-fan ovens and cookers) then the probability is that the fan element or oven elements have failed.

Electricity trips (Rcd) when I turn the oven on or grill

This is normally an element that has gone to earth, This is a well-known fault with electric ovens, the insulation breaks down in the elements and trips the RCD , best way is to stick a meter on each element and check that they have not got earth leaks on them. But this can also be a wiring fault.

The grill element doesn’t work

This would usually indicate that the grill element is faulty. Check these: Grill element, Oven changeover switch, Overheat thermostat, Main oven thermostat, if used to regulate the grill temperature.

The oven fan is not working or spinning correctly (slow) or is noisy

The fan motor may need to be replaced see video on this also the cooling fan motor can cause same problems.

The oven overheats and burns everything

Normally this is a simple thermostat failure which would manifest itself as this symptom.

The oven or cooker cuts out after it’s been on for a while

This is an overheating problem which can be caused by the fan motor or main oven thermostat or a faulty safety thermostat that will be causing the problem. It can also be caused by a failure of the cooling fan, where fitted, but usually these go noisy before failing, Safety thermostats are used to prevent the oven or cooker overheating and will shut the oven down.