Beko OIF21300B Electric Single Oven 1800 Watts is not heating

Hi Paul! My Beko OIF21300B Electric Single Oven is not heating, when I first turned on the cooker it tripped out a few times. Now the cooker turns on and the display lights come on but the cooker does not seem to work and start heating up. Can you help?
Steven

I will try and help with this problem with your Beko OIF21300B Electric Single Oven

If your Beko OIF21300B Electric Single Oven is not heating or tripping the electric supply there is a good chance that the fan oven element has blown. I have included some videos below to help you test and then replace the element. Also, I have included a link here for a list of parts for your Beko OIF21300B cooker.

In the video, I mentioned about 5 common problems.;

Oven will not heat because the element is faulty.
Oven won’t heat because timer on manual.
Oven won’t heat because of a fault with thermostat or selector switch.
Oven not cooking evenly (one element faulty or fan not working correctly).
Oven not reaching temperature normally an element but possible fan motor.

Common Problems with Electrical Ovens

The oven will not turn on

The first thing you need to check is that the oven timer is not on auto if it is, turn it on to manual.

No Heat in Oven

If the fan is running and the thermostat light comes on but you get no heat (or just the thermostat light on in non-fan ovens and cookers) then the probability is that the fan element or oven elements have failed.

Electricity trips (Rcd) when I turn the oven on or grill

This is normally an element that has gone to earth, This is a well-known fault with electric ovens, the insulation breaks down in the elements and trips the RCD , best way is to stick a meter on each element and check that they have not got earth leaks on them. But this can also be a wiring fault.

The grill element doesn’t work

This would usually indicate that the grill element is faulty. Check these: Grill element, Oven changeover switch, Overheat thermostat, Main oven thermostat, if used to regulate the grill temperature.

The oven fan is not working or spinning correctly (slow) or is noisy

The fan motor may need to be replaced see video on this also the cooling fan motor can cause same problems.

The oven overheats and burns everything

Normally this is a simple thermostat failure which would manifest itself as this symptom.

The oven or cooker cuts out after it’s been on for a while

This is an overheating problem which can be caused by the fan motor or main oven thermostat or a faulty safety thermostat that will be causing the problem. It can also be caused by a failure of the cooling fan, where fitted, but usually these go noisy before failing, Safety thermostats are used to prevent the oven or cooker overheating and will shut the oven down.