It’s leaking on rinse/drain.spin. I looked at the manual which advised removing the filter cap to clean. I’ve tried to do so but can’t. It turns a little, then no further and I can’t pull it out either. Don’t know what to do next!

Kathryn von Stein

Paul answers

I will try and help with this problem WTG941B1W Beko 9kg 1400rpm Washing machine,

If your washing machine is leaking then it is a possibility that the pump is causing the problem and as you say you can’t get the filters out, I suspect it will be full of coins or other bits,  it is also worth removing the sump hose as you can’t have a blockage in here as well.

 I have sent you over the full workshop manual to assist you the front panel does come off as you will see in the exploded diagram below this will give you clear access to the pump and you should also be able to see if any other parts will causing the machine to leak like the Door seal Etc

You will find all the parts at the bottom of the page.

 

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

 

Error and fault codes on this machine:

E01 *Heater ntc open circuit error or *Heater ntc short circuit error

E02 *Heater open circuit error

E03 Heater continuously active error

E04 * Valve triac short circuit or ‘Valve triac diode error

E05 ‘Pump triac open circuit or Pump blocked or Pump triac diode or ‘Pump rotor locked and does not rotate error

E06 *Motor triac short circuit or *Motor in triac diode mode error.

E07 *Water level reading error

E08 *Water cut off or *Valve triac open or *Pump triac short circuit error

E09 ‘Door lock triac open circuit error

E10 ‘Door lock triac short circuit error E11 *Motor open circuit or * Tacho open circuit

E17 *Program terminated error without spinning because of foam

E18 *Program terminated error without spinning because of unbalanced load

 

Common 7145641600 WTG941B1W Beko 9kg 1400rpm Washing machine faults with links to the right repair guide

  1. The machine won’t fill with water

Make sure the door is properly closed, check that inlet hoses are clear and not kinked and that the water supply is connected and functioning. Water valve may be faulty See our video on water valves

  1. The drum doesn’t turn

There are a number of things that can cause this, including worn carbon brushes, drive belt problems, or a faulty motor or control unit PCB. On new machines with 3 phase motors or inverter motors, they get a lot of control board faults

  1. The machine stops mid-cycle

This generally means that the timer, thermostat, or heater had failed. The washing machine may stop due to these faults or the water rinse valve may be faulty or the machine has not emptied the water out of the drum in an allocated period of time.

  1. The washing machine is noisy

A rattle, while the drum is moving, could be due to something stuck in the drum, coins and bra wires are common culprits. You may be able to remove the drum paddles to get to the offending item or remove the sump hose or heater. It’s also worth checking the drain filter to make sure that’s clear. A noisy washing machine may also indicate failed or worn bearings or drum spider. Try turning the drum by hand when the machine is empty. If you hear a rumbling noise or can feel ‘play’ in the drum, it’s likely that the bearings need replacing. You can also get drum spring or shock absorber problems.

  1. Water not draining from the washing machine

This usually means there’s a blockage in the drainage filter, or the pump itself has failed. The first thing you’ll want to do is empty the water so you can rescue your laundry. Pull out the drain hose, pop it into a bucket and let gravity do the work. Also, check the sump hose and waste pipe if fitted to a sink unit the problem can also be the connection.

  1. The washing machine won’t spin

Problems with the spin cycle are relatively common washing machine faults, if your machine knows there is water still in the drum it will not allow the drum to spin it must empty in an allocated period of time. The good news is that they’re generally relatively inexpensive and simple to fix. Balance sensors will override the cycle if the clothes are unevenly distributed and could cause the machine to vibrate. This can happen if you’ve overloaded the washer, or if you’re trying to spin just a few items. Try reloading light loads or removing a few items from heavy ones. If this fails, motor carbon brushes may need to be replaced. On new machines with 3 phase motors or inverter motors, they get a lot of control board faults

  1. The door won’t open

This will usually be due to water not draining, or a faulty door lock. Drain manually as above. If that doesn’t fix the problem you may be able to remove the top of the machine and release the lock from the inside see videos.

  1. Clothes smell bad

If you always use low-temperature washes and biological detergents you could have a build-up of bacteria or even mold in the machine. Try running a hot empty wash once a week. You should also clean out the soap dispenser regularly, and leave the machine door open to air after you’ve removed the washing.

  1. The washing machine is damaging clothes

Tears in clothes indicate foreign bodies in the machine or damage to the drum.

10.The washing machine is constantly filling with water

the machine is siphoning or water valve is leaking

11.The machine reports a fault code or error code

Error codes can be on the display or given in certain lights flashing sequences. Washing machine fault codes are not universal but may only point you or an engineer in the right direction they are not 100% accurate they are only that for guidance. Your owner’s manual may help you identify the problem and even suggest a fix. In other cases, you’ll need an engineer to trace the fault. Don’t be tempted to ignore a fault code, even if the machine seems to be functioning normally. Some codes are ‘early warning signs’ and fixing the machine at an early stage could save you time and money in the long run. Contact us with the full model number and detailed description 

If you need any further assistance please feel free to contact me. all the best Paul.

Paul Charmbury

Appliances Engineer

Video to help you with your 7145641600 WTG941B1W Beko 9kg 1400 rpm Washing machine

How to Unblock or Replace Beko Washing Machine Pump

How to remove a washing machine sump hose and filter to clear blockages

How to Replace Beko washing Machine Door Seal

How to open Washing machine Filter that is stuck or Jammed
Next
Previous

Match your part for 7145641600 WTG941B1W Beko 9kg 1400rpm Washing machine and the use reference number in list below and click on the link to your part

Reference Part Number Description
1 2425300100 End Of Life TOP FRAME ASSEMBLY
1 2467700100 End Of Life TOP FRAME ASSEMBLY
10 2453800100 End Of Life FRONT DOOR ASSEMBLY BX XL
10 2496600100 FRONT DOOR ASSEMBLY BX XL
100 2000811400 AIR PIPE HOSE L=610 mm
1008 2829960200 PULLEY FIXING SCREW
1014 2850820100 ENCODER PROTECTION PART
103 2814430200 End Of Life HOSE CLAMP
103 2814430100 End Of Life HOSE CLAMP
106 2906760300 End Of Life HOSE -WATER INLET -COLD
106 2906860700 HOSE -WATER INLET SLIM-COLD
106 2426000200 HOSE -WATER INLET SLIM-COLD
1096 2836970500 SCREW (4×11)
1096 2836970300 SCREW (4×11)
11 2842650100 End Of Life DOOR GLASS
1106 2907190600 HOSE
117 2818440200 TUB INLET HOSE.
12 2850580300 INNER DOOR PLX
1210 2865200100 TUB-FILTER HOSE ASSEMBLY COMPLETE
1227 2707340300 PUMP PROTECTIVE COVER
1227 2707340400 PUMP PROTECTIVE COVER
13 2847740500 DOOR LOCK
13 2847740400 DOOR LOCK
1363 2500703900 WELDED TUB ASSY
1384 2863403000 HEATER ASSEMBLY without NICHEL
1384 2850360100 HEATER ASSEMBLY
1384 2882601600 End Of Life HEATER ASSEMBLY without NICHEL
1396 2451509099 LIGHT GUIDE BUTTON ASSMBLY
14 2850610100 BX XL HINGE
1406 2820820100 CHASSIS FLAP
1442 2817050300 SHOCK ABSORBER PIN
1442 2817050400 SHOCK ABSORBER PIN
1459 2826440100 FRONT WALL HOLDER
146 2421701000 DETERGENT BOX GROUP
1460 2826450100 FRONT WALL HOLDER PIN
1467 9003860400 SCREW.
1467 9003860800 SCREW.
1470 2833820100 CABINET ASSEMBLY AND BACK COVER
149 2831721000 COUNTERWEIGHT-LOWER
149 2831721400 End Of Life COUNTERWEIGHT-LOWER
1520 2830690100 CABLE HOLDER
1521 2834480100 CABLE HOLDER
1528 2828820400 PANEL GASKET
1529 2831380100 CABLE HOLDER
1535 2826420100 HOSE HOLDER
1537 2843030200 FLAME BARRIER
1537 2858780100 FLAME BARRIER
1540 2833362446 ENERGY VALUE LABEL
1575 2858560300 TERMINAK SHEET
1575 2858560100 TERMINAK SHEET
1585 2850850100 PUMP COVER ARCP1
1586 2850840100 PUMP COVER HOLDER
1592 2707730400 PLASTIC SCREW 3x4_5
16 2858570200 PLASTIC HINGE
16 2835320100 HINGE SUPPORT BRACKET
162 2003721600 CONDENSATOR ANTIINTERFERENTA
162 2827981200 INTERFERENCE SUPPRESSOR
162 2834310400 INTERFERENCE SUPPRESSOR
1640 2819711100 End Of Life PRESSURE SWITCH
1640 2833830400 PRESSURE SENSOR METALFLEX
1646 2829010100 SHOCK ABSORBER
1657 2841630200 HEXAGON NUT FİBER
166 2834083000 MAIN CABLE HARNESS
1660 2840820200 INPUT IMPEDANCE COIL foil
1686 2002374300 HOSE CLAMP (ø 1.8)
169 2836390900 POWER CORD ASSY.
1701 2837560100 PINNED CABLE CONNECTOR
171 2804980200 End Of Life NTC
1741 2850350100 INNER PART
1785 9003611200 SHEET METAL SCREW(B4_2x11.5-TOOTHED)
18 2912700500 End Of Life ADJUSTABLE FEET ASSEMBLY
1829 2849430100 STOPPER
1837 2443900200 CUSHION SHEET ASSEMBLY
1845 9003272500 PLASTIC SCREW
186 2844510200 MAIN BOARD
1862 2450000100 PUMPE COVER ASSEMBLY
1873 2848250100 TOP FRAME FIXING PART LEFT
1874 2847840100 TOP FRAME FIXING PART RIGHT
1880 2912701400 ADJUSTABLE FEET ASSEMBLY
194 2840940200 PUMP-FILTER ASSEMBLY
194 2880402000 End Of Life PUMP-FILTER ASSEMBLY(WATER COOLING)
1951 2859590100 CABLE HOLDER
197 2459209062 DETERGENT DRAWER FRONT COVER ASSY.
20 2737601600 TRANSPORT SAFETY ASSEMBLY
201 2811570200 End Of Life MODULE HOLDER
203 2451901200 SELECTOR KNOB ASSEMBLY
208 2451409041 PANEL BODY ASSY.
230 2603901100 CABINET BELLOWS CLAMP ASSEMBLY
25 2801540300 REAR COVER CAP
25 2801540200 REAR COVER CAP
33 9001230800 PLASTIC CLAMP 152 mm
336 2421900300 DRAWER ASSEMBLY
339 2850590100 OUTER COVER BX XL ARCP1
341 2851560200 PULL OPEN HOOK
373 2803800700 DISCHARGE HOSE ASSEMBLY
401 2851420800 FRONT PANEL ARCP1 BX_XL
411 2811230100 DISCHARGE HOSE HOLDER
43 2820525973 USER S MANUAL (EN)
45 2816990200 UPPER COUNTER WEIGHT
45 2816990700 UPPER COUNTER WEIGHT
53 2820360300 SUSPENSION SPRING
54 2466300300 DOOR HOOD-RUBBER ASSY
55 2802580600 DOOR GASKET SPRING
552 2002370600 HOSE CLAMP (Ø 13.3)
553 2000610200 HOSE.
56 2816660200 PULLEY
59 2845710200 End Of Life ELASTIC POLY-V BELT
59 2816750200 End Of Life ELASTIC POLY-V BELT
598 2872700100 FILTER ASSEMBLY
60 2834030100 Screw
617 2703940700 FELT (SIDE PANEL)
63 2834820200 MOTOR
632 2838910100 HINGE BUSHING
658 9003860200 SCREW.
66 2816871100 SHOCK ABSORBER
677 2808740200 STOPPER.
679 2844290100 End Of Life INPUT IMPEDERENCE INDUCTOR GROUP
679 2889400300 INPUT IMPEDERENCE INDUCTOR GROUP
682 2811250100 M8 x 1_25 FLANGED NUT
7 2827610100 BACK COVER WHITE
719 2853580100 PLUG HOLDER(NATURAL)
719 2811260300 PLUG HOLDER(NATURAL)
719 2811260100 PLUG HOLDER(NATURAL)
723 2839500100 DC MODULE HOLDER
737 2906870200 WATER INLET VALVE
737 2906850200 WATER INLET VALVE
737 2836480100 WATER INLET VALVE
748 2817690101 DC MODULE
78 2801430300 SHOCK ABSORBER PIN
78 2801430400 SHOCK ABSORBER PIN
797 2831370100 CABLE HOLDER
797 2831320200 Cable Holder
80 2898400200 SPECIAL BOLT.
820 2834830300 SHEET SCREW (SELF ADJUSTING THREADING)
827 2832240400 TOP SUPPORT BRACKET
8325 181300303 M4X10 TAPTITE SCREW.
8331 371202407 Carbon Brush Assembly (L24MF7_39mm)
8335 372205506 Tacho Assembly
8336 373500801 End Of Life Tachometer Cover..
8355 2002371700 HOSE CLAMP (Ø 28_7)
8359 2002372400 HOSE CLAMP (Ø 38.8)
8365 2828040300 DRAIN HOSE HOLDER
8365 2002740200 DRAIN HOSE HOLDER
8384 9003270100 PLASTIC SCREW
8385 9003270400 PLASTIC SCREW (4_10)
8396 111201020 BOLT (AM5x10 DIN 7985 4.8-H)
8397 9003610900 SHEET METAL SCREW (B4.2×9.5 K=8 TOOTHED
8397 9003610500 SHEET METAL SCREW(B4_2x9_5-TOOTHED)
8398 9003670100 SCREW FOR PLASTIC -4.5×12
8399 9003270900 PLASTIC SCREW
8412 2831790100 SPECIAL SHEET SREW
8416 2832450100 PLASTIC SCREW
8419 2963340100 End Of Life WASHERED NUT (M6x1)
8419 9001230300 PLASTIC CLAMP 100 mm
8430 2826150100 HOSE CLAMP
8431 2826150200 HOSE CLAMP
9 2850940100 HANDLE BX XL
93 2704480100 HOSE HOLDER
953 2903090500 DOOR LOCK WATER PROTECTOR
964 2845310300 CARD PROTECTOR FOIL