June 4, 2020 
Machine stopped mid cycle reported f21 then f 63 then display went blank I have replaced carbon brushes but am still getting f63 can you advise please .sincerely Stephen Hick
Stephen Hick
Paul answers
I will try and help with this problem Bosch washing machine wae24467gb/05
the first thing I would do is try doing a reset on the system I have put the instructions for this here.
F63 is control board error and you will have to replace the control board this is not cheap it might be cheaper to get a used machine and swap out the facial panel with the pcb and all the electrics you can find machines on ebay with knackered bearings as cheap as £20.
However, before replacing you can try to reset the control:
Turn the knob to off.
Close the door.
Turn the knob to 6 o’clock position.
Wait 2 seconds.
The start/pause should begin flashing.
Press and hold the spin button.
Turn the knob to 7 o’clock position.
Wait 2 seconds.
Release the button.
Turn the knob to off.
If this won’t clear the error unfortunately the control board will need replacement.
Spare parts for Bosch wae24467gb/05
If you need any further assistance please feel free to contact me. all the best Paul.
Paul Charmbury
Appliances Engineer
Video to help you with your Bosch wae24467gb/05 washing machine
