I installed one Elitech STC 1000, but I do not know where it is best to mount the temperature sensor.I initially mounted it on the right side wall, but as soon as I open the door, warm air, warm air goes inside and give the startup command.

Aurelian Cheregi

Paul answers

I will try and help with this problem with your Electrolux ERB40402W8  Fridge Freezer

You will need to find the cold spot inside the cabinet on this fridge it is next to the absorption plate normally​ at the back. I use a thermal imaging camera which is built into my mobile phone to find these places, I suggest you look at the couple of videos I have put below which will assist you you will also have a setting on the thermostat to be able to change the range all the turning on and turning off I can’t remember what the setting is on this but I have included a couple of videos below​

Electrolux ERB40402W8

If you need any further assistance please feel free to contact me. all the best Paul.

Paul Charmbury

Appliances Engineer

Video to help you with your Electrolux ERB40402W8 Temp sensor probe Elitech STC 1000 fitting thermostats

Thermal Imaging Camera to repair refrigeration using mobile phones, android Iphone

How to Program elitech ecs 16 digital temperature controller for Fridges and freezers

Fitting twin compressor Fridge freezer with Elitech ECS-16 Digital Temperature Controller
Next
Previous

List of spare parts for Electrolux ERB40402W8 Fridge Freezer