I have changed heater elements and mother board still can’t solve it

Steven

Paul answers

I will try and help with this problem Hoover Vhc691b tumble dryer

If you have changed the heater and checked both thermostats including the forward thermostat, then I would normally say it is the relay on the circuit board, but as you have replaced this already I am suspecting that you may have a problem with the pump unit or the float switch in the bottom of the machine. The problem with this is you will have to take the whole drum out to get at it. There are some video tutorials for you to watch that may assist you in your repair.

Hoover Vhc691b tumble dryer 

If you need any further assistance please feel free to contact me. all the best Paul.

Paul Charmbury

Appliances Engineer

Video to help you with your Hoover Vhc691b tumble dryer

Tumble dryer not heating Hoover Candy diagnosing fault and repair

How to replace a tumble dryer belt Hoover or Candy

How to service a Hoover Candy condenser tumble dryers

Hoover Candy Tumble dryer drum not turning and belt ok faulty capacitor

Noisey Tumble dryers, Rear drum bearing on , Candy, Hoover, Iberna, Kelvinator, tumble dryers

Hoover Candy tumble dryer empty water Indicator flashing, runs for a few seconds then stops
Next
Previous

List of spare parts for Hoover Vhc691b tumble dryer