Hotpoint tcl770P Tumble Dryer I think the heater is shot

Hi paul..Spoke with you earlier – just to recap I cannot get a ohm reading through the ntc sensor – buty could be down to difficulty with the meter connection,,many thanks for your helpbest Tom
tom mccarthy

I will try and help with this problem Hotpoint TLC770P Tumble Dryer

I have just done some research on your tumble dryer and it was a couple of different type of heaters fitted to this model of the machine. I have listed them both below for you, please make a note. There are two different types of wiring connections one has two connectors one with five wires one with two wires. The other has a 5 wire connector and two separate wires. I have also listed some videos below to assist you with your repair if you need any further assistance please feel free to contact me.