January 17, 2018 
HelloI need some advise with respect to what I should change on my dryer. It initially came up with an error code of F04. I reset the error message and now it comes up with error F06. When I switch it on the drum turns and then after 20sec the dryer stops and the error message flashes. Please help! Warm regards Aftab
Aftab
Paul answers
I will try and help with this problem Hotpoint Tumble Dryer TDWSF83BEP
the first error F04
- Heater relay or heating element faulty 6th Sense light on or flashing
- Check wiring to heater
- Check wiring to thermostats
- Check heating element
- Check thermostats
- Check control board
the second fault is F06
- Heating element NTC error detected 6th Sense and Drying lights lit or flashing
- Check wiring to heating element NTC
- Check heating element NTC
- Clean any fluff or lint from the sensor and surroundings
I would have a look at the heating element first
Hotpoint Tumble Dryer TDWSF83BEP
If you need any further assistance please feel free to contact me. all the best Paul.
Paul Charmbury
Appliances Engineer
