Hotpoint WMA10P washing machine Bearings failed

Following up one-to-one consultation request for 1pm today:I put new bearings in a Hotpoint WMA machine a couple of months ago, but evidently the seal was not right and the bearings are failing due to the grease washing out of them. I wonder if you could have a chat / look to see if there is any obvious problem with the seal and / or my installation of it. Thanks.

Simon

Paul answers

I will try and help with this problem Hotpoint WMA10P washing machine

If you have replaced the bearings and the spider then I suspect you may have damage to the drum bearing casing I have found a complete half drum for you with bearings spider seal the lot. also exploded diagram below and videos to help you

Hotpoint WMA10P spare parts

Drum kit C00199338

Video to help you with your Hotpoint WMA10P washing machine

How To Change Bearings On A Washing Machine? Washing Machine Bearing Replacement

How to change bearings on a washing machine 2 of 4

How to change bearings on a washing machine 3 of 4 this includes how to fit the shaft or spider.

How to change bearings on a washing machine 4 of 4. The reassembly of the machine.

Hotpoint WMA10P washing machine full list of spare parts for this model below