Hi, this is a real head scratcher. I have a Siemens WT46E384GB/24 Tumble Dryer. Originally the machine developed a PCB fault, bad connection causing the power to fluctuate on and off. The board was sent off for repair to the guys you recommended in one if your videos, and has been repaired and then rechecked under warranty by them. However now with the repaired board, when I select a program and press start the machine instantly shuts off and the comes back on but it will not run. Its almost like a fuse is tripping and then resetting. Ive checked for continuity on all of the wires and components and the capacitor is showing 8.47mF against its rating if 8.5. I tried a new heating element with no success and the motor is spinning freely.Would really appreciate you thoughts on what else could cause this issue I have a video if it will help.Many Thanks, Jon

Jon Hogg

Paul answers

I will try and help with this problem about Siemens WT46E384GB/24 Tumble Dryer,

Hi Jon, sorry to hear about the problem with your tumble dryer. You have a Siemens WT46E384GB/24, which is one of the last good machines made by Bosch and Siemens. These machines are basic but very reliable, so it’s worth trying to repair it.

To check if you have a circuit board problem or a power supply issue, follow these steps. Look for an electronic suppressor (also called a filter) at the back right-hand side of the dryer. Set your multimeter to 240 volts and connect the crocodile clips to the live and neutral wires. Turn on the machine and power it up.

If the voltage drops on the multimeter when you press start, it means there’s a power failure when load is put on the circuit. This could be due to a bad socket, faulty extension lead, or another wiring issue. It might also mean the electronic filter is failing.

If the voltage doesn’t drop, then the issue might be with the printed circuit board. Sometimes, companies test and repair circuit boards but don’t test them under load. When you press the start button, the motor and capacitor pull 5-6 amps for a few microseconds. If there’s a dry joint on the circuit board or a faulty capacitor or component that breaks down under load, it may work fine without load but fail when the motor or heating system is active.

I hope this explanation helps. I’ll make a video response for you as well. The display disappearing likely means either a circuit board failure or a power failure coming into the machine. Good luck with your repair!

I have also put exploded diagrams of your machine below and a full list of spare parts available. It might also be worth keeping an eye on eBay or Facebook marketplace for a machine with the similar model as yours as then you would be able to get spare parts from a machine that may have a blown heating  system Or faulty motor sometimes you can get these as a little as £10-£20

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

Siemens WT46E384GB/24 Tumble Dryer

Siemens WT46E384GB/24 Tumble Dryer Spares

If you need any further assistance please feel free to contact me. all the best Paul.

Paul Charmbury

Appliances Engineer

Video to help you with your Siemens WT46E384GB/24 Tumble Dryer

Match your part for Siemens WT46E384GB/24 Tumble Dryer and the use reference number in list below and click on the link to your part

Siemens WT46E384GB/24 Tumble Dryer Control Panel
Siemens-WT46E384GB24-Tumble-Dryer-Control-Panel

Siemens WT46E384GB/24 Tumble Dryer Body
Siemens-WT46E384GB24-Tumble-Dryer-Body

Siemens WT46E384GB/24 Tumble Dryer Door
Siemens-WT46E384GB24-Tumble-Dryer-Door

Siemens WT46E384GB/24 Tumble Dryer Drum
Siemens-WT46E384GB24-Tumble-Dryer-Drum

Siemens WT46E384GB/24 Tumble Dryer Other Parts
Siemens-WT46E384GB24-Tumble-Dryer-Other-Parts

full list of spare parts for Siemens WT46E384GB/24 Tumble Dryer model below

Reference Part Number Description
0101 00646775 Tray handle-dispenser
0102 00600159 Knob-programme
0103 00600148 Spacer
0104 00648562 Control module
0105 00623688 Capacitor-interference
0106 00644995 Power cord
0107 00700785 Panel-facia
0199 12022831 Repair-set
Reference Part Number Description
0201 00247370 Panel side
0202 00247370 Panel side
0203 00475311 Front panel
0204 00475305 Hood
0205 00621457 Sealing
0206 00649014 Heating element
0207 00600157 Sensor-NTC
0208 00618141 Limiter-temperature
0209 00249227 Case-rear part
0212 00445048 Duct
0213 00445049 Duct
0214 00622324 Lock-mechanical
0215 00613752 Seal
0216 00613753 Sensor-NTC
0218 00611613 Clip
0219 00247610 Bearing shield
0223 00652184 Fluff Filter for Tumble Dryers
0224 00154159 Holder
0225 00420271 Clamping piece
0226 00600811 Holder
0227 00600433 Cover
0228 00656841 Sealing
0230 00770162 Worktop
0231 00613598 Wheel
0232 00707054 Insulating part
0237 00700248 Front rail
0238 00649053 Ventilation duct
Reference Part Number Description
0301 00614390 Hook
0302 00644221 Replacement handle for tumble dryers
0303 00661324 Cover
0304 00662173 Frame-window
0305 00445420 Glass cover
0306 00667799 Frame
0307 00646933 Door hinge
0308 00661323 Ring
Reference Part Number Description
0401 00497211 Drive coupling
0402 00657917 Belt-drive
0403 00618931 Bearing
0404 00652500 Seal set – drum support
0405 00649045 Sealing
0407 00249014 Drum
0410 00652502 Taper
Reference Part Number Description
0501 00611942 Foot
0502 00145467 Motor
0503 00615653 Spring
0504 00600436 Roller-tension
0505 00600151 Belt-drive
0506 00650172 Fan drum
0507 00647542 Fan drum
0508 00610150 Capacitor-metal paper
0509 00497214 Lid
0512 00497217 Pump
0513 00429372 Hose connection inlet
0514 00670084 Housing
0515 00615455 Overflow
0516 00673226 Container-condensed water
0517 00644783 Hose-fill
0518 00497529 Cover
0519 00445426 Cover
0520 00445427 Cover
0521 00600147 Lock-mechanical
0522 11000416 Heat exchanger
0523 00600529 Hose clamp
0524 00445042 Insulating part
0525 00094041 Outlet hose
0526 00751938 Lid
0527 12013784 Outlet hose
0528 00655300 Holder
0529 00416546 Connection
0530 00041270 Cable strap
0531 00445504 Lid
0532 20005204 Case-bottom
0535 00600543 Hose-fill