Beko washing machine not starting how to replace the door lock interlock

by / Tuesday, 06 March 2018 / Published in Door Locks & Switches

A Common fault with Beko washing machine is that the appliance will not start; you may have an error code showing on digital display type E9 or E10 but sometimes they just show a warning code like 0417 which only means a fault is detected. this video will show you how to replace the old door lock or sometimes known as interlock

This tutorial will show you how to identify a Door Interlock fault on Beko washing machines the error code E9 or E10 will normally show.

this type of lock has been fitted to many make like these:

Aftron, Ahma, Akai, Alien, Alpari, Altus, Andi, Ansonic, Arcelik, Arctic, Armani, Atlas, Axxon, Aya, Beko, Beta, Blomberg, Bluematic, Bluesky, Carad, Carrefour Home, Cellini, Codini, Connect, Crown, Defy, Delton, Donar, Elba, Electric Co, Elektra Bregenz, Elettrozeta, Elin, Eskimo, Euro, Euroline, Europa, Eurosky, Faber, Fagor, Federal, Fensa, Ferette, Fisher & Paykel, Flavel, Fortress, Fricon, Funix, Goldi, Grundig, Hajdu, Helkama, Houseline, Hyundai, IFB, Koncar, Lamo, Lamona, Magic, Majestic, Mercury, Mirage, Modena, Moritz, Nikkei, Nojintech, Nordfrost, Novox, Okean, Orion, Pacific, Pars, Peabody, Penguin, Perfect, Perfekt, Philco, Privileg, Prolux, Rainford, Reeson, Rotel, Saba, Saivod, San Giorgio, Sang, Sanyo, Siera, Sunny, Superfrost, TechnoStar, Technolux, Tecnokit, Tensai, Thor, Tophouse, Universal, Valenti, Venus, Vico, Victor, Victory, Wasco, Weltec, White-Westinghouse, Winson and Winstar.

 

Replacement for 2805310100

Replacement for 2805310400

Replacement for 2805310500

Beko washing machine e9 and e10 Error code means that the door is open or you may have a fault with the lock. if the door is clearly closed but the machine may think it is open, presumably because it’s not getting power passed through the door interlock. see our videos on how door locks work

The first thing to check is that the door is closed properly. When the door is closed, the latch on the door pushes into the door interlock and slides a bar over, it should latch firmly and activate a part inside the lock. At this point the power is passed from one side of the door lock to the other and on to the rest of the machine.

Washing machine e9 and e10 error, door detected as being open

  • Check door is closed correctly and latched.
  • Check door handle for damage or wear.
  • Check child safety if this feature is on the machine.
  • Check door lock if inoperative replace door lock.
  • Check door lock wiring for burnt connections

Before doing any work on the appliance, disconnect it from the electric supply!

  1. The machine will be displaying the error 
  2. Check the door is shutting correctly.
  3. Strip down the machine to get access to the door interlock. 
  4. Check wiring harness for signs of burnt connections or broken wires.
  5. Replace door lock is faulty.
  6. Reassemble the washing machine test the machine and make sure it starts. If all is ok problem is fixed

 

 

 

 




Tagged under: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

15 Responses to “Beko washing machine not starting how to replace the door lock interlock”

  1. Gaga says : Reply
    March 10, 2018 at 3:41 am

    Thanks so much for sharing!

  2. Iceman says : Reply
    March 21, 2018 at 3:39 pm

    Aveți un interes dubios să prezentați mașinile de spălat turcești Beko,deși nu cred în ruptul capului că se pot compara cu un Lg Direct Drive,Samsung Eco Bubble,Bosch etc.dar mă rog părerile dvs.vizavi de Beko nu mă interesează pentru că sunt mașini de spălat din clasa medie de eficiență și din clasa economică de prețuri,dar cam atât !

  3. Ken says : Reply
    March 16, 2019 at 8:51 pm

    I have a Beko WM74135
    When I switch it to a cycle the ready light comes but also the light for the end/cancel and nothing else happens. The door stays unlocked.
    I checked for the fault code and it shows e18.
    Removed and cleaned the sump (not very dirty) but still not working.
    Could this be the door lock?
    Many thanks,
    Ken

  4. Gary says : Reply
    August 7, 2019 at 1:44 pm

    My Beko washing machine WMB 81241 LB is starting but only after shutting the door 4 or 5 times.
    Is it the door lock mechanism?
    No error codes are coming up.
    Thanks

  5. Antony Prabhu says : Reply
    April 22, 2020 at 4:30 pm

    Hi Paul,

    It’s very nice and useful to see your videos from your YouTube channel.

    From your video I learned the function of door switches in the washing machines.
    I have a faulty door switch in my Beko front loading washing machine.It doesn’t show any resistance to the PTC. During this pandemic it’s difficult for me to find a spare one.

    Is it ok, to connect the live and common (Bypass) to use the washing machine until I’ll find a spare one?

    Looking for your support. Thanks in advance.

  6. Andy S says : Reply
    May 28, 2020 at 11:33 am

    Very informative Paul, Beko door lock change was a piece of cake after watching the video. Thanks.

  7. david says : Reply
    June 29, 2020 at 4:05 pm

    i have changed the door handle and interlock but the door is not locking the door will close but not doing anything the de warning on the machine is still going

    my washing machine is an LG wm12220 ofd

  8. Mitchell says : Reply
    August 14, 2020 at 8:56 pm

    Hello i had a e 08 error, i checked the valvs and got 4,5 ohms and all pipes were good. I did not get any voltage to the valvs so i assumed it was the main board so i have replaced it and now i get 15 20 error come up. Please help i have no idea what it could be. I shopped from a Spanish website as i live in spain. I would really appreciate some help as i have no money for a new machine 🙁

  9. Bal says : Reply
    April 13, 2021 at 6:48 pm

    Error E18 on model wm74155lw

  10. Fred says : Reply
    July 1, 2021 at 7:18 pm

    hello where can i buy the Beko washing machine door lock please?
    thank you

  11. Lasha says : Reply
    February 7, 2022 at 7:50 pm

    Hi my washing machine goes drying unstoppable when I press start button in any mode
    Model WTE 7502 BO
    please help me

  12. Kimberley White says : Reply
    April 30, 2022 at 8:46 am

    I just wanted to say excellent video, I managed to fix my washing machine rather than buy a new one! Thank you

24h technical help answers

Leave a Reply to Kimberley White

Click here to cancel reply.

Buy Paul a beer




 
TOP