NEW REPAIR GUIDES

FORGOT YOUR DETAILS?

AAH, WAIT, I REMEMBER NOW!

Beko Washing Machine Door Handle & Hinge Catch: how to replace

by / Wednesday, 07 March 2018 / Published in Door Locks & Switches, Washing machines

In this video, I'll be showing you how to change a door hinge and door catch handle on a Beko washing machine. It can be used on a lot of brands listed below.

Beko wm washing machine door hinge and handle catch external type

Beko wmb washing machine door handle & hinge catch internal type

>

If your door hinge is broken or door handle is loose and you can't open the door it's likely the door handle is broken and it needs replacing. The most common part the door handle to break is the in a plastic molding, and this is usually due to excessive force being used to open the door when the door is locked shut.

Aftron, Ahma, Akai, Alien, Alpari, Altus, Andi, Ansonic, Arcelik, Arctic, Armani, Atlas, Axxon, Aya, Beko, Beta, Blomberg, Bluematic, Bluesky, Carad, Carrefour Home, Cellini, Codini, Connect, Crown, Defy, Delton, Donar, Elba, Electric Co, Elektra Bregenz, Elettrozeta, Elin, Eskimo, Euro, Euroline, Europa, Eurosky, Faber, Fagor, Federal, Fensa, Ferette, Fisher & Paykel, Flavel, Fortress, Fricon, Funix, Goldi, Grundig, Hajdu, Helkama, Houseline, Hyundai, IFB, Koncar, Lamo, Lamona, Magic, Majestic, Mercury, Mirage, Modena, Moritz, Nikkei, Nojintech, Nordfrost, Novox, Okean, Orion, Pacific, Pars, Peabody, Penguin, Perfect, Perfekt, Philco, Privileg, Prolux, Rainford, Reeson, Rotel, Saba, Saivod, San Giorgio, Sang, Sanyo, Siera, Sunny, Superfrost, TechnoStar, Technolux, Tecnokit, Tensai, Thor, Tophouse, Universal, Valenti, Venus, Vico, Victor, Victory, Wasco, Weltec, White-Westinghouse, Winson and Winstar.

 

Safety first, always unplug an appliance before carrying out any work.

the first thing you will need to do is to peel back the door seal to give you access to the rear of the door hinge there is a retaining plate which you need to keep hold of while you are undoing the screws this will stop it falling inside.

Once you have removed the door you need to place it on a flat surface covered with a tea towel this will stop scratches appearing on the door frame,

 The next thing you will need to do is remove all the screws around the Frame, then using a thin screwdriver flat blade prize the two halves of the door apart.

This will now give you access to the door hinge,  and also the door handle,  the door hinge is pretty self-explanatory and can easily be replaced.

  the door handle and catch  will need to have the pin slid out  so this will come apart,  it is very important to this point  to make sure you have some good photographs of the way  washing machine door handle was assembled,  Slide the pin out  replace the door handle  and reassemble the machine  in the Reverse process




10 Responses to “Beko Washing Machine Door Handle & Hinge Catch: how to replace”

  1. Robert says : Reply
    August 29, 2018 at 11:51 am

    Hello, I need advice on how to dismantle the door in the washing machine and get to the door handle I will only add the inside of the door do not have any screws or screws? are there any latches? I need to replace the door handle but I do not know how to get in. I will be grateful advice.
    BEKO WX842430W

  2. Rajinder says : Reply
    October 9, 2018 at 9:02 am

    How do you open the door as my handle has broke and the door is closed

  3. Dominic Brown says : Reply
    December 28, 2018 at 12:43 pm

    I need a replacement door handle for a Beko WM 74155 L W

  4. Harrison says : Reply
    April 14, 2019 at 9:13 am

    How do we open door when handle is broken?

  5. DAVID LESLIE CLARK says : Reply
    May 5, 2021 at 12:41 pm

    i have a beko wx842430w washing machine the handle is broken how do i get to take it apart as there doesnt seem to be any screws

  6. Peter Glynn says : Reply
    November 10, 2021 at 6:37 am

    Hi, any tips on getting replacement handle to latch. I have it the pin backwards and handle down as described, however the pin seems to fall forward when I put the door cover on?
    Thanks!

  7. Tim says : Reply
    August 3, 2022 at 9:09 pm

    Our Beko WMI71641 stopped working.
    It gave an [E] error code which was replaced with the numbers 15 19. Number come up when the self diagnostic test is started. When I cycle through the tests, everything works apart from the drum movement ones.
    Please can you help?

  8. Danny says : Reply
    January 16, 2023 at 9:27 am

    My door is locked, but the handle that you squeeze is broken. How do I get the door to unlock how to fix it? Beko number is WMB -81241 Ls

  9. Nynke says : Reply
    January 21, 2023 at 3:09 pm

    I’ve replaced the handle exactly like in the video (which was very helpful thanks!). However, now it does not close properly nor does it lock when the machine is turned on.. How do I fix that?

24h technical help answers

Leave a Reply to Rajinder

Click here to cancel reply.

TOP