Beko WTK range of Washing Machines E02 Error Code E2

by / Tuesday, 25 October 2022 / Published in Heating Systems, Washing machines

How to test E02 Error fault code on Beko made washing machines

Is your Beko Washing Machine displaying Error Code E2 or E02?

This tutorial will help on all Beko WTK72011 WTK74011 WTK82011 WTK84011 WTK94121 WTK10412 Series washing machines.

It will also help with all the brands that Beko manufacture for

Aftron, Ahma, Alpari, Altus, Ansonic, Arcelik, Arctic, Aya, Baoerma, Beko, Belling, Beta, Blanco, Blomberg, Bluesky, Bomann, Brandt, Bru, Carrefour Home, Codini, Continental Edison, Crystal, Cucine, Cylinda, Defy, Ecron, Elba, Elektra Bregenz, Elettrozeta, Elin, Elvita, Eskimo, Essentielb, Far, Federal, Fensa, Fisher & Paykel, Flavel, Fortress, Friac, Fricon, Generalmatic, Gplus, Grundig, Haka, Hyundai, IFB, Kenwood, Keysmart, Konka, Lamona, Leader, Listo, Majestic, Montpellier, New World, Nikkei, Nortline, Oceania, Oceanic, Orion, Pars, Peabody, Perfect, Philco, Princess, Prolux, Raymond, Royal, Saba, Saivod, SanGiorgio, Sang, Schaub Lorenz, Selecline, Siera, Singer, Speed, Starke, Superfrost, Tecnogas, Tophouse, Venus, Vico, Victory, Videocon, Wasco, Westpoint, White-Westinghouse, Winstar, Wpro, Zenith,

Are you finding that Your Beko WTK washing machine is not heating the water in the machine? maybe the machine heated water before but no longer heats at all.

Your Beko washing machine may also be displaying an E2 Error code. If you have the LED version of the machine this is displayed in BCD format (Binary Code Decimal) This video will explain it in Full

The E2 or E02 Error Code explainer Video

These error codes normally indicate a fault with the heating element in the machine. The Washing machine heating element has gone open circuit.

The heating element is used to heat the water inside the washing machine drum.  This is controlled by the main pcb on the machine. The NTC sensor controls the relay on the main board to turn off the Heating element when the required temperature is reached.

Beko WTK range Heating element specifications

  • Operating Voltage : 230VAC 50-60 Hz
  • Power : 1950W
  • Resistance : 26W @ 3ohms When the resistance is measured with a multimeter, You should get a reading of around 26ohms.

How to Repair Beko Washing Machine WTK E02 or E2 error code

Wash Element with NTC

Part numbers 2703370500, 2850360100, 2863400500, 2863700500


  1. Is the machine displaying E2 or E02 error?
  2. Remove the lid of the machine for easy measurement, remove the control panel and locate the KN5 Heater connector.
  3. Remove the connector and test the connector pins on the board  for short circuit. If yes replace the main board. If no proceed to number 4
  4. Remove the rear panel of the machine.  Remove at least one of the heater terminals and measure heater resistance; is the resistance approximately 25 Ohms ? No? Replace the Heater. If  Yes proceed to number 5.
  5. Does the heater function although there is no water?  If No then restart the machine. If Yes proceed to number 6
  6. Locate and check the water level sensor. Measure the frequency between pins 1 and 2 (Blue-White)It should be around 25700 Hertz,  while the machine is empty and energised.
24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.