Condenser Tumble Dryer how to replace the pump unit.
Condenser Tumble Dryer Keeps Showing Empty Light and Not Turning.
If your Condenser Tumble Dryer keeps showing the empty light and the tumble dryer will not start then this video will teach you how to replace the pump unit.
This video will show you how to replace a Condenser Tumble Dryer pump and float switch system when the water light stays on.
How to fix & replace the pump unit on Ariston, Export, Hotpoint-Ariston, Hotpoint, Indesit Tumble Dryers.
On condensers dryer the main difference is that the moist air will pass over a condenser (hence the name of condenser dryer) which will condense the water and pump or drain that water to a tank which can then later be emptied.
When the tank is full the empty light comes on, and the machine will not start until emptied or if the pump unit is not working correctly this will also cause the tumble dryer to stop working.
The pump unit normally has a float system with a micro switch. And an electrical pump which is activated by the float switch when the water level rises. Some tumble dryers have these pumps running constantly.
These pump units can clog and on allot of appliance the floats start to jam because the polystyrene float designates over a period of time.